Sony XCD-SX90 Panduan Servis - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Servis untuk Kamera Digital Sony XCD-SX90. Sony XCD-SX90 30 halaman. Digital camera module
Juga untuk Sony XCD-SX90: Manual (4 halaman), Panduan Teknis (38 halaman), Panduan Teknis (39 halaman), Petunjuk Pengoperasian (2 halaman)
Halaman Cetak
1-8. Unleaded Solder
Boards requiring use of unleaded solder are printed with a
lead free mark (LF) indicating the solder contains no
lead.(Caution: Some printed circuit boards may not come
printed with the lead free mark due to their particular size.)
: LEAD FREE MARK
m
. Be sure to use the unleaded solder for the printed circuit
board printed with the lead free mark.
. The unleaded solder melts at a temperature about 40 dC
higher than the ordinary solder, therefore, it is recom-
mended to use the soldering iron having a temperature
regulator.
. The ordinary soldering iron can be used but the iron tip
has to be applied to the solder joint for a slightly longer
time. The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful.
1-8
XCD-U100/SX90/V60
XCD-U100CR/SX90CR/V60CR