Sony XCD-V60 Panduan Servis - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Servis untuk Kamera Digital Sony XCD-V60. Sony XCD-V60 30 halaman. Digital camera module
Juga untuk Sony XCD-V60: Manual (4 halaman), Panduan Teknis (38 halaman), Panduan Teknis (39 halaman), Petunjuk Pengoperasian (2 halaman)

Halaman Cetak
Sony XCD-V60 Panduan Servis

1-5. Round Type Connector (12-Pin)

1. Remove the upper case and lower case.
(Refer to Section 1-2-1.)
2. Remove the rear panel assembly.
(Refer to Section 1-2-2.)
3. Remove the CN-3020 board. (Refer to Section 1-3-5.)
4. Remove the nut and washer, then remove the round
type connector (12-pin).
Rear panel
Washer
Nut
5. Attach the round type connector (12-pin) in the reverse
order of steps 1 to 4.

1-6. Matching Connectors and Cables

When external cables are connected to the connector of
each unit, the hardware listed below (or equivalents) must
be used.
Connector
Matching connector/cable
IEEE1394b
IEEE1394b cable (9P-9P)
(Commercially available products)
IEEE1394b cable (9P-6P)
(Commercially available products)
DC IN
Camera cable
CCXC12P02N (2 m)
CCXC12P02N (5 m)
CCXC12P02N (10 m)
CCXC12P02N (25 m)
XCD-U100/SX90/V60
XCD-U100CR/SX90CR/V60CR

1-7. Signal Inputs and Outputs

1 IEEE1394b connector
1
1
1
1
Round type
connector (12-pin )
Pin No.
1
2
3
4
5
6
7
8
9
2 DC IN: 12-pin (male)
2
2
2
2
Pin No.
1
2
3
4
5
6
1
. IEEE1394b-2002
9
1
— External view —
Signal name
Remarks
TPB (_)
Twisted pair B (_)
TPB (+)
Twisted pair B (+)
TPA (_)
Twisted pair A (_)
TPA (+)
Twisted pair A (+)
TPA (R)
Twisted pair A (Ground reference)
VG
Power ground
N.C.
VP
Power voltage input
TPB (R)
Twisted pair B (Ground reference)
1 9
2
8
!/
3 !-
!=
4
6
5
— External view —
Signal
Pin No.
POWER_GND
7
POWER_IN
8
ISO_GND
9
STROBE_OUT
10
GPIO_OUT1_
11
GPIO_OUT1+
12
2
5
4
7
Signal
GPIO_IN2
GPIO_OUT2_
GPIO_OUT2+
GPIO_IN1
TRIGGER_IN
ISO_GND
1-7