Sony AIR-SW10TI - Wireless Audio Transmitter Component Manual
Jelajahi secara online atau unduh pdf Manual untuk Sistem stereo Sony AIR-SW10TI - Wireless Audio Transmitter Component. Sony AIR-SW10TI - Wireless Audio Transmitter Component 2 halaman. General stereo/hi fi components/tape decks/cd players/mini disc players/audio systems
Juga untuk Sony AIR-SW10TI - Wireless Audio Transmitter Component: Informasi (1 halaman), Garansi Terbatas (1 halaman)
Halaman Cetak
English
To stabilize S-AIR reception
Read the following when S-AIR reception is poor or unstable.
To use S-AIR products (S-AIR main unit, subwoofer, and the optional
sub unit)
Before using S-AIR products, have the following ready.
•
Confirm the wireless transceivers are inserted
correctly.
Insert the wireless transceivers firmly to the depth
into the slots of the S-AIR main unit, subwoofer,
and the optional sub unit, respectively.
•
Confirm that the S-AIR IDs of the S-AIR main
unit, subwoofer, and the optional sub unit are
the same.
The default setting of the S-AIR IDs of the S-AIR
main unit, subwoofer, and the optional sub unit is "A."
Depending on the S-AIR product, you can set the
S-AIR ID by the switch or the setup menu.
For details, refer to the operating instructions of
each S-AIR product.
About environments where S-AIR products (S-AIR main unit,
subwoofer, and the optional sub unit) are used
S-AIR products use a radio frequency of 2.4 GHz. Certain electronic equipment or other factors may
cause lost connection or instability in S-AIR reception.
•
Electronic equipment influence
The following may cause interference or cross talk.
–
Cellular phones, cordless phones
–
Wireless LAN, personal computers
–
Game machines using radio signals
–
Microwave ovens
•
Other factors
The following may cause poor reception.
–
Materials or structures, such as walls and floors
–
The location where an S-AIR product is placed
When using S-AIR products, place them as far as possible from the above electronic equipment, or
place where S-AIR reception is stable.
©2009 Sony Corporation Printed in China
AIR-SW10Ti
When S-AIR reception is poor
Check the following.
Keep cords that are connected to the S-AIR product (power cord, antennas or other cords) away from
the wireless transceiver and slot.
Keep as much space as possible around S-AIR products.
Insert firmly
Avoid placing S-AIR products on top of, or directly below, other electronic equipment.
Avoid placing S-AIR products in a closed rack, metal rack, or under a table.
Same S-AIR ID
A
B
Adjust the location (height, orientation, and place in the room) of S-AIR products until reception is
C
S-AIR ID
the most stable.
Place so that the wireless transceivers of the S-AIR main unit, subwoofer, and the optional sub unit are
closer.
Place so that S-AIR products are separated from other wireless devices.
Place so that S-AIR products are separated from metal doors or tables.
If you cannot improve S-AIR reception, change the "RF CHANGE" setting. For details, refer to the
operating instructions of each S-AIR product.
4-152-274-11(1)