Argo Fanny black Panduan Petunjuk Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Kipas angin Argo Fanny black. Argo Fanny black 6 halaman. Desk and stand fan

Halaman Cetak

2. MODE SELECTION button (MODE)

Allows you to adjust 3 modes (SLEEP, NATURAL, NORMAL).

The LEDS SLEEP, NATURAL, NORMAL, will switch on simoultaneously.

1. TIMER button

When the appliance is operating, the

operating time can be set by touching the

TIMER button: from 0,5 to 7,5 hours, with

each touch corresponding to half an hour.

The TIMER DISPLAY is switched on

simultaneously and shows the time set.

The unit will switch off automatically at the

end of the programmed time.

HOW TO INSERT / REMOVE THE REMOTE CONTROL BATTERIES (refer to the diagram

below)

Open the battery cover on the back of the remote control (press and pull the cover).

Place the batteries inside the cover, making sure the polarity is correct.

Slot the cover back into position on the remote control.

Use no. two cells model LR03AAA 1,5V, compliant with Battery Directive no. 2006/66/EC.

Remove the batteries when not using the remote control for a long period of time.

INFORMATION FOR CORRECT DISPOSAL OF THE BATTERIES IN ACCORDANCE WITH EUROPEAN

DIRECTIVE 2006/66/EC

Please replace the battery when its electrical charge has been exhausted: at the end of its useful life, it must not

be disposed of together with unsorted waste. It must be must be delivered to appropriate separated waste

disposal plants or to dealers that provide a similar service. Separate waste disposal of batteries prevents

potential negative effects on the environment and human health resulting from inadequate disposal, and also

allows the materials from which it is made to be recovered and recycled in order to achieve significant savings in

terms of energy and resources. The separate disposal obligation is underlined by the crossed-out dustbin

symbol appearing on the battery. Illegal disposal of the product by the user shall result in the application of

of administrative sanctions as defined by current regulations.

V 2/13

REMOTE CONTROL

3. OFF button

To switch off the fan press

the button OFF.

4. SWING button (SWING)

When the appliance is operating, touch

the button SWING to make the

appliance oscillate automatically, shifting

the air flow from left to right.

Touch the button SWING again to

interrupt the oscillation.

5. ON/SPEED button

Touching the ON/SPEED button will

cause the low speed LED to light and

the appliance will begin to operate at low

speed.

Touching the button ON/SPEED once

again the fan speed increase from low to

medium to high.

The LED SPEED is switched on

simultaneously.