Sony CMT-ED1A Panduan Petunjuk Pengoperasian - Halaman 33
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Sony CMT-ED1A. Sony CMT-ED1A 36 halaman. Compact component stereo system
Juga untuk Sony CMT-ED1A: Panduan Petunjuk Pengoperasian (36 halaman)
Halaman Cetak
Specifications
Amplifier section
DIN power output
Continuous RMS power output
Music power output:
Inputs
MD IN (phono jacks):
Outputs
MD OUT (phono jacks):
PHONES (stereo phone jack):
SPEAKER:
CD player section
System
Laser
Laser output
Wavelength
Frequency response
Signal-to-noise ratio
Dynamic range
Tape player section
Recording system
Frequency response
(DOLBY NR OFF)
Wow and flutter
15 + 15 watts
(6 ohms at 1 kHz, DIN)
17 + 17 watts
(4 ohms at 1 kHz, 10%
THD)
22 + 22 watts
sensitivity 450 mV,
impedance 47 kilohms
sensitivity 250 mV,
impedance 1 kilohm
accepts headphones of 8
ohms or more
active speaker system, 4
ohms
Compact disc and digital
audio system
Semiconductor laser
( = 780 nm)
Emission
duration: continuous
Max. 44.6 W*
* This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
780 – 790 nm
2 Hz – 20 kHz (±0.5 dB)
More than 90 dB
More than 90 dB
4-track 2-channel stereo
50 – 13,000 Hz (±3 dB),
using a Sony TYPE I
cassette
50 – 14,000 Hz (±3 dB),
using a Sony TYPE II
cassette
±0.15% W. Peak (IEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
Aerial
Aerial terminals
Intermediate frequency
AM tuner section
Tuning range
Aerial
Intermediate frequency
Speakers
Speaker system
Speaker units:
Rated impedance
Dimensions (w/h/d)
Mass
General
Power requirements
Power consumption
Dimensions (w/h/d)
Mass
Supplied accessories
Optional accesories
Design and specifications are subject to change
without notice.
87.5 – 108.0 MHz (50 kHz
step)
FM wire aerial
75 ohm unbalanced
10.7 MHz
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
AM bar aerial, External
aerial terminal
450 kHz
Full range, active MFB
10 cm dia., cone type
4 ohms
Approx. 195 205
120
3
1
3
mm (7
/
8
/
4
/
4
8
in)
Approx. 1.5 kg (3 lb 7 oz.)
net per speaker
230 V AC, 50/60 Hz
60 watts
Approx. 127 212
184
3
1
mm (5
8
/
7
/
in)
8
4
incl. projecting parts and
controls
Approx. 3.6 kg
(7 lb 15 oz)
AM bar aerial (1)
Remote RM-SED1 (1)
Stabilizer (1)
Batteries (2)
FM wire aerial (1)
Speaker grille net (1)
Speaker mounting
screws(4)
Wall hunging blacket
WHB-ED1
Speaker saran net
SSN-ED1
Stand SU-ED1
4
33