Cisco APP-LSS Menginstal dan Meningkatkan

Jelajahi secara online atau unduh pdf Menginstal dan Meningkatkan untuk Perangkat Keras Jaringan Cisco APP-LSS. Cisco APP-LSS 32 halaman. Fddi card and appliques

Halaman Cetak
Doc. No.
78-0946-08
Installing and Upgrading the
CSC-C2FCIT FDDI Card and Appliques
Product Numbers:
CSC-C2FCIT=
APP-LMM=
APP-LMS=
APP-LSM=
APP-LSS=
MC-C2FCIT-V10.3=
This publication provides instructions for installing the Fiber Distributed Data Interface (FDDI)
modules in the AGS+ router. These modules include the FDDI interface card with translational
bridging (CSC-C2FCIT) and the four available fiber-optic transceiver appliques, which provide
single-mode and/or multimode network interfaces. The C2FCIT card operates with the second-
generation ciscoBus card (CSC-CCTL2).
This publication also includes instructions for upgrading the C2FCIT microcode when required.
The sections following are included in this publication:
•
•
•
•
•
Note
operating correctly up until the time you performed this installation or upgrade, and that any
problems are a result of this procedure.
Copyright © 1994
Cisco Systems, Inc.
All rights reserved.
FDDI Module Overview, page 2
Installation Prerequisites, page 7
Installing Cards and Appliques, page 14
Testing the Installation, page 23
Upgrading Microcode, page 28
The procedures in the section "Testing the Installation" assume that your system has been
1