Argo Lotus Panduan Petunjuk Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Kipas angin Argo Lotus. Argo Lotus 9 halaman. Wall fan

MODE BUTTON

Press the MODE button to select the ventilation mode among: NORMAL, NATURAL e SLEEP.

TIMER BUTTON

When the appliance is operating, the operating time can be set by pressing the TIMER button: by 30 minutes step,

up to 7,5 hours. The TIMER DISPLAY is switched on simultaneously and shows the time set.

SWING BUTTON

When the appliance is operating, press the SWING button to make the appliance oscillate automatically, shifting the

air flow from left to right.

Press SWING button again to interrupt the oscillation.

OFF BUTTON

Press the OFF button on the control panel or remote control to turn off the fan.

ON/SPEED BUTTON

Press ON/SPEED on the control panel or remote control; a sound will indicate that the appliance is on, with low fan

speed and in Natural mode.

In each of the 3 modes, by pressing this button you can change the fan speed (low - L, medium - M, High – H)

HOW TO INSERT / REMOVE THE REMOTE CONTROL BATTERIES ( not supplied) (refer to the diagram below)

Open the battery cover on the back of the remote control (press and pull the cover).

Place the batteries inside the cover, making sure the polarity is correct.

Slot the cover back into position on the remote control.

Use no. two cells model LR03AAA 1,5V, compliant with Battery Directive no.

2006/66/EC.

Remove the batteries when not using the remote control for a long period of time.

V 12/16