Cisco AS5850 Panduan Pemasangan Perangkat Keras - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Perangkat Keras Jaringan Cisco AS5850. Cisco AS5850 30 halaman. Universal gateways
Juga untuk Cisco AS5850: Panduan Referensi Cepat (38 halaman)

Cisco AS5850 Panduan Pemasangan Perangkat Keras
Chapter 1
Cisco AS5850 Product Overview
Boots and reloads software images
Provides source clocks used by all feature cards and power supplies
Provides a BITS input BNC connector
Connects to an external alarm source through a connector located on the front panel
Install the RSC card in the Cisco AS5850 in either slot 6 or slot 7. The card plugs directly into the
backplane.
The RSC card consists of the following components:
CPU
1Gigabyte of
I/O controller
Compact Flash memory card
Boot Flash memory
EEPROM
NVRAM
Packet switch ASICs
Fast Ethernet, console, auxiliary and two Gigabit Ethernet interfaces
For detailed specification tables, refer to
Figure 1-6
Figure 1-6
SDRAM
The universal gateway supports two RSCs for a redundant connection to the network backbone or for
Note
a split backplane configuration.
78-10573-06 0A
RSC (QED RM7000 - 250MHz)
ERSC (Broadcom BCM1250 - 650MHZ).
DDR memory on ERSC
shows the RSC components.
RSC Components
Appendix A, "Cisco AS5850 Specifications."
Compact flash
Gigabit Ethernet ports
Cisco AS5850 Universal Gateway Hardware Installation Guide
Field-Replaceable Units
Backplane
connector
1-15