Argo TABLO EVO Panduan Petunjuk Pengoperasian - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Kipas angin Argo TABLO EVO. Argo TABLO EVO 10 halaman.

It is possible to adjust the angle of inclination of the fan assembly. Turn off the fan, slightly loosen the adjustable screw by

turning it counter-clockwise. Place the fan assembly in the desired angle, then tightly screw the adjustable screw by turning

it clockwise.

TIMER BUTTON

Press the button

on the control panel or the TIMER button on the remote control to select the fan shutdown interval in

the following sequence: 1 hour, 2 hours, 4 hours up to a maximum of 7 hours. The LEDs on the control panel will light up

according to your selection.

MODE BUTTON

(activated only by remote control)

Press this button on the remote control (function not present on the control panel) to select the desired ventilation mode

between Normal, Natural and Sleep:

- Normal Mode: By pressing the Mode button on the remote control once, the ventilation speed is constant and the L icon

remains lit on the control panel. It is possible to select the ventilation speed between high, medium and low (the

corresponding LEDs light up according to the speed in progress).

- Natural mode: By pressing the Mode button on the remote control twice, the fan speed varies according to a predefined

program. It is possible to select the ventilation speed between high, medium, low, stop, the icons light up according to the

current ventilation speed. The corresponding icon on the control panel is NAT.

- Sleep mode: Press the Mode button on the remote control three times, the fan speed varies according to a preset

program. It is possible to select the ventilation speed between high, medium, low, stop, the icons light up according to the

current ventilation speed. The corresponding icon on the control panel is SLP.

REMOTE CONTROL

V 01/21