Cisco ASA 5506-X Panduan Pemasangan Perangkat Keras - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Perangkat Keras Jaringan Cisco ASA 5506-X. Cisco ASA 5506-X 26 halaman. Threat defense reimage guide
Juga untuk Cisco ASA 5506-X: Panduan Memulai Cepat (10 halaman), Panduan Memulai Cepat (14 halaman), Panduan Penyiapan yang Mudah (11 halaman), Manual Perangkat Lunak (37 halaman), Pasang dan Hubungkan (12 halaman), Panduan Instalasi (46 halaman), Memasang Sasis (10 halaman)

Halaman Cetak
Cisco ASA 5506-X Panduan Pemasangan Perangkat Keras

Status Lights

Status Lights
Facing the rear of the chassis, the status lights are located on the top left edge (facing the front of the chassis,
they are in the back right corner of the top). The network port lights are at the top sides of each network port.
The following figure shows the lights on the top left edge.
1
2
Cisco ASA 5506-X Hardware Installation Guide
4
LED
Description
Power
Power supply status:
• Unlit – Power supply off.
• Solid green – Power supply on.
See
Power Supply, on page 7
your specific ASA.
Status
System operating status:
• Green – Normal system function.
• Amber – Critical alarm indicating one or more of the following:
for additional power information specific to
• Major failure of a hardware or software component.
• Over-temperature condition.
• Power voltage outside the tolerance range.
About the ASA 5506-X
Online Only