Sony MEX-BT3700U Panduan Petunjuk Pengoperasian - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Sony MEX-BT3700U. Sony MEX-BT3700U 45 halaman. Bluetooth audio system
Juga untuk Sony MEX-BT3700U: Instalasi/Koneksi (2 halaman), Spesifikasi (2 halaman), Panduan Cepat (2 halaman), Instalasi/Koneksi (2 halaman), Panduan Cepat (2 halaman)
Halaman Cetak
-
Operating an iPod directly
- Passenger control
You can operate an iPod connected to the dock
connector directly.
1
During playback, press and hold
(MODE).
"MODE IPOD" appears and you will be able
to operate the iPod directly.
To change the display items
Press
(DSPL).
The display items change as follows:
Track name
~
Artist name
~
Album name
~
MODE IPOD
~
Clock
To exit the passenger control
Press and hold
(MODE).
Then "MODE AUDIO" will appear and the play
mode will change to "RESUMING."
Notes
• The volume can be adjusted only by the unit.
• If
this mode is canceled, the repeat setting will be
turned off.
Bluetooth (Handsfree calling
and Music streaming)
Bluetooth operations
To use the Bluetooth function, the following
procedure is necessary.
o
Pairing
When connecting Bluetooth devices for the
first time, mutual registration is required. This
is called "pairing." This registration (pairing)
is required only for the first time, as this unit
and the other devices will recognize each
other automatically from the next time. You
can pair up to 8 devices. (Depending on the
device, you may need to input a passcode for
each connection.)
e
Connection
To use the device after pairing is made, start
the connection. Sometimes pairing allows to
connect automatically.
e
Handsfree calling/Music streaming
You can talk handsfree and listen to music
when the connection is made.
Support site
http://esupport. sony.com
http://www.xplodsony.com/
Pairing
First, register ("pair") a Bluetooth device
(cellular phone, etc.) and this unit with each
other. You can pair up to 8 devices. Once pairing
is established, there is no need for pairing again.
1
Place the Bluetooth device within 1 m
(3 tt) of this unit.
2
Press and hold
CID
until
"0"
flashes
(about 5 seconds).
The unit enters pairing standby mode.
16
(