Argo WALLNER DWL-3AF Buku Petunjuk - Halaman 10

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Laminator Argo WALLNER DWL-3AF. Argo WALLNER DWL-3AF 12 halaman. Laminating machine

SAFETY INSTRUCTIONS

Do not leave cable where other may trip.

Do not attempt to open casing

Do not use if wet.

Switch off and unplug when not in use.

Do not cover the heat vents when in use.

Do not touch the heat vents when the machine is working.

Do not put any items through the heat vent.

Do not use if machine, cable, or socket is damaged.

Do not laminate in the vicinity of flammable substances

10.

Do not use force while laminating.

11.

Materials with rough edges or very thick ones may cause damage to the rollers.

12.

Wait for the pouch to cool down, it may be hot.

13.

When, according to the temperature limits in point 4.5.4 of the EN 60950-1:2006

norm, the risk of burning due to overpassing those limits appears, on the machine's

casing is placed a warning: UWAGA! GORĄCA POWIERZCHNIA NIE DOTYKAĆ or

symbol

IMPORTANT RECOMMENDATIONS / WARNINGS

For your own safety please maintain particular care while installing and using the machi-

ne.

GENERAL

Keep hands, long hair, loose articles of clothing, jewellery and ties away from device to

avoid serious injury.

Unstable surfaces may cause the fall of the device, which can result in body injuries.

Please avoid fast stopping, use of additional force or surface unevenness while transpor-

ting the device on trolley, casters or table.

Do not remove mechanical and electrical securities such as locks, covers or others.

It is forbidden to use objects not dedicated to do so or liquids.

ELECTRICAL

The machine should be plugged to the electric circuit only as presented in the manual.

The socket must be in close vicinity with easy access to the device. While moving the

machine, pull the plug from the socket.