Sony MHC-GNX800 Panduan Petunjuk Pengoperasian - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Sony MHC-GNX800. Sony MHC-GNX800 40 halaman. Sony mini hi-fi component system operating instructions
Halaman Cetak
5
Press ENTER.
The track(s) is(are) programmed.
The program step number appears in the
display.
6
To program additional discs or tracks.
To program
Other discs
Other tracks on the
same disc
Other tracks on
other discs
7
Press N.
Program Play starts.
Other operations
To
Do this
Cancel Program
When playback is stopped, press
Play
PLAY MODE on the remote
repeatedly until "PROGRAM"
disappear from the display.
Clear a track from
Press CLEAR on the remote
the end of program
when playback is stopped.
Tips
• The program you made remains in the system's
memory even after it has been played back. Press N
to play back the same program again.
• If "--.--" appears instead of the total playing time
during programming, this means:
– you have programmed a track number which
exceeds 20.
– the total playing time has exceeded 100 minutes.
– you have programmed an MP3 audio track.
Repeat steps
3 and 5
4 and 5
3 to 5
Tuner
Presetting radio stations
You can preset up to 20 FM stations and 10 AM
stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
Automatic tuning preset
You can automatically tune in all of the stations
that can be received in your area and then store
the frequency of your favourite stations.
1
Press TUNER/BAND repeatedly to
select "FM" or "AM".
2
Press TUNING MODE on the remote
repeatedly until "AUTO" lights up in
the display.
3
Press TUNING +/– (or press –. or
>+ on the remote).
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. "TUNED" lights
up in the display. When a FM stereo
program is tuned in, "STEREO" lights up in
the display.
If "TUNED" does not lights up and the
scanning does not stop
Set the frequency of the radio station you
want as described in steps 2 and 3 of
"Manual tuning preset".
4
Press TUNER MEMORY on the remote.
A preset number flashes in the display.
The stations are stored from preset
number 1.
LINK
Preset number
continued
13
GB