Sony MHC-GX750 Panduan Petunjuk Pengoperasian - Halaman 33
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Sony MHC-GX750. Sony MHC-GX750 47 halaman. Limited warranty (us only)
Juga untuk Sony MHC-GX750: Panduan Petunjuk Pengoperasian (48 halaman), Spesifikasi (2 halaman), Garansi Terbatas (1 halaman)
Halaman Cetak
Should you encomlter
a problem
with your
system, do the following:
1
Make sure the power cord and speaker
cords are correctly and firmly connected.
2 Find your problem in the troubleshooting
checklist below and take the indicated
corrective action.
It" the problem persists after doing all of the
above, consult your nearest Sony dealer.
When
the
I/_
indicator
flashes
Immediately
unplug the power cord and
check the ibllowing
items.
• If your system has a voltage selector, is the
voltage selector set to the correct voltage?
Check the voltage
for your region,
then
make sure the voltage
selector is set
correctly.
• Are the + and
speaker
cords short-
circuited'?
• Are you using only the prescribed
speakers'?
• Is anything blocking
the ventilation
holes
on the rear of the system?
Check all the above items and fix an):
problems
found. After I/_
indicator
stops
flashing, reconnect
the power cord and turn
on the system. If the indicator still flashes, or
if the cause of the problem
cannot be found
even after checking
al! the above items,
consult your nearest Sony dealer.
General
The display
starts flashing
as soon as you
plug in the power
cord even though
you have
not turned
on the system
(see step 5 of
"Hooking
up the system"
(page 7)).
• Press DISPLAY
twice while the system is off The
demonstration
disappears
"
" -" appears
in the display.
• A power intemlption
has occmred
Set the clock
(page 10) and timer settings
(pages 25 and 26)
again
The clock
setting/radio
presetting/timer
is
canceled.
• Redo the tbllowing:
"Setting the clock"
(page 10)
"Presetting
radio stations"
(page
15)
"Falling asleep to music" and "Waking
up to
music" (page 25)
"Timer recording
radio programs"
(page 26)
There
is no sound.
• Press VOLUME
+_ or ttml VOLUME
contlol
on
the unit clockavise.
• Make sure the headphones
are not connected.
• Check the speake!
connections
(page 7).
• There is no andio output during
the Rec Timer.
Sound
comes
from one channel,
or
unbalanced
left and right volume.
• Place the speakels
as synmletrically
as possible
• Connect
the supplied
speakers.
Sound
lacks bass.
• Check that the speakeFs
+ and
jacks me
connected
correctly
There
is severe hum or noise.
• Move the system away from tile source
of noise.
• Cotmect
the system
to a different
wall outlet.
• Install a noise
filter (commercially
available)
to
the power cord
The timer
cannot
be set.
• Set tile clock again (page 10).
The timer
does not function.
• Check the timer setting and set the conect
time
(pages 26 and 27).
• Cancel the Sleep Time! Function
(page 25)
--t
a
€-
o
5'
continued
33Gs