Sony MHC-RV20 Panduan Petunjuk Pengoperasian - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Sony MHC-RV20. Sony MHC-RV20 40 halaman. Sony operating instructions mini hi-fi component system mhc-rv20
Halaman Cetak
Note
Keep the antennas away from the speaker cords.
3 Connect the video input jack of your TV
to the VIDEO OUT jack with the
supplied video cord.
When using a TV
Turn on the TV and select the video input so you can
view the pictures from this system.
4 For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
Refer to the print on your system's
VOLTAGE SELECTOR for available
settings.
* Saudi Arabian model: 120 – 127 V
5 Connect the power cord to a wall
outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
6 Set the color system to PAL or NTSC
depending on the color system of your
TV while the power is off.
The color system
Do this
of your TV
Press ?/1 while holding
AUTO
(factory setting)
down X. If your TV
automatically changes the
color system according to
the input signal, the system
is set to AUTO.
Press ?/1 while holding
NTSC
down >. The system is
set to NTSC.
Press ?/1 while holding
PAL
down .. The system is
set to PAL.
Notes
• You cannot set the color system in Power Saving
Mode.
• When you play back a VIDEO CD recorded in a
different color system from the one you set to the
unit, the picture image may be distorted.
continued
GB
7