Sony MHC-RV5 Panduan Petunjuk Pengoperasian - Halaman 41

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Sony MHC-RV5. Sony MHC-RV5 44 halaman. Sony operating instructions mini hi-fi component system mhc-rv6/rv5

Halaman Cetak

Before placing a cassette in the tape

deck

Take up any slack in the tape. Otherwise the tape may

get entangled in the parts of the tape deck and become

damaged.

When using a tape longer than 90

minutes

The tape is very elastic. Do not change the tape

operations such as play, stop, and fast-winding

frequently. The tape may get entangled in the tape

deck.

Cleaning the tape heads

Clean the tape heads after every 10 hours of use.

Be sure to clean the tape heads before you start an

important recording or after playing an old tape. Use

a separately sold dry-type or wet-type cleaning

cassette. For details, refer to the instructions of the

cleaning cassette.

Demagnetizing the tape heads

Demagnetize the tape heads and the metal parts that

have contact with the tape every 20 to 30 hours of use

with a separately sold demagnetizing cassette. For

details, refer to the instructions of the demagnetizing

cassette.

Specifications

Amplifier section

MHC-RV6

The following measured at AC 120, 127, 220, 240 V,

50/60 Hz

DIN power output (rated) 115 + 115 watts (6 ohms

Continuous RMS power output (reference)

MHC-RV5

The following measured at AC 120, 127, 220, 240 V,

50/60 Hz

DIN power output (rated) 100 + 100 watts (6 ohms

Continuous RMS power output (reference)

Inputs

MD/VIDEO (AUDIO) IN (phono jacks):

GAME INPUT (VIDEO) (phono jack):

GAME INPUT (AUDIO) (phono jack):

MIC (phone jack):

Outputs

PHONES (stereo mini jack):

SPEAKER:

SURROUND SPEAKER (MHC-RV6 only):

MD/VIDEO (AUDIO) OUT (phono jacks):

VIDEO OUT (phono jack):

at 1 kHz, DIN)

140 + 140 watts (6 ohms

at 1 kHz, 10% THD)

at 1 kHz, DIN)

120 + 120 watts (6 ohms

at 1 kHz, 10% THD)

voltage 450/250 mV,

impedance 47 kilohms

1Vp-p, 75 ohms

voltage 250 mV,

impedance 47 kilohms

sensitivity 1 mV,

impedance 10 kilohms

accepts headphones of

8 ohms or more

accepts impedance of 6 to

16 ohms

accepts impedance of

24 ohms

impedance 1 kilohms

1Vp-p,

impedance 75 ohms

continued