Sony MHC-RX70 Panduan Petunjuk Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Sony MHC-RX70. Sony MHC-RX70 44 halaman. Mini hifi component system
Juga untuk Sony MHC-RX70: Panduan Petunjuk Pengoperasian (50 halaman), Panduan Petunjuk Pengoperasian (44 halaman), Panduan Petunjuk Pengoperasian (44 halaman)

Halaman Cetak
Sony MHC-RX70 Panduan Petunjuk Pengoperasian
3
Turn the jog dial.
The frequency indication changes and
scanning stops when the system tunes in
a station. "TUNED" and "STEREO" (for
a stereo program) appear.
AUTO
4
Press TUNER MEMORY.
A preset number appears in the display.
Preset number
AUTO
5
Turn the jog dial to select the preset
number you want.
6
Press ENTER/NEXT.
The station is stored.
7
Repeat steps 1 to 6 to store other
stations.
To tune in a station with a weak
signal
Press TUNING MODE repeatedly to select
"MANUAL" in step 2, then turn the jog dial
to tune in the station.
To change the preset number
TUNED
Start over from step 1.
STEREO
VOLUME
To change the AM tuning interval
MHz
(Except for the Middle Eastern model)
The AM tuning interval is factory-preset to 9 kHz
(10 kHz in some areas). To change the AM tuning
interval, tune in any AM station first, then turn off
the power. While holding down the ENTER/NEXT
button, turn the power back on. When you change
the interval, AM preset stations will be erased. To
TUNED
reset the interval, repeat the same procedure.
STEREO
VOLUME
Tip
The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
7