Sony MHC-V3 Panduan Petunjuk Pengoperasian - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Sony MHC-V3. Sony MHC-V3 36 halaman.
Halaman Cetak
Disc/USB Playback
Playing a disc
1
Press CD.
2
Press Z on the unit.
3
Load a disc with the label side
facing up on the disc tray.
When you play
back an 8 cm
disc such as a
CD single, place
it on the inner
circle of the tray
4
Press Z on the unit to close the
disc tray.
Do not forcibly push the disc tray to
close it as this may cause a
malfunction.
5
Press N to start playback.
Notes on disc
• (For AUDIO CD) This system can recognize
up to 99 tracks.
• (For MP3 dics) This system can recognize up
to
– 999 folders (including root and empty
folders).
– 999 MP3 files.
– 250 MP3 files in a folder.
– 8 folders levels (tree structure of files).
• CD-TEXT information is not supported.
10
GB
Before using a USB
device with this system
Check the information on the website
about compatible USB devices (page 25).
To select the playback source or
transfer destination (USB Memory
Select)
If the USB device has more than one
memory (for example, an internal
memory and a memory card), you can
select which memory to use as a playback
source or transfer destination.
Note
You cannot select a memory during playback or
transfer. Make sure to select a memory before
starting playback or transfer.
Use the buttons on the unit to perform this
operation.
1
Press FUNCTION repeatedly to
select USB function.
2
Connect a USB device to the
port.
3
Press OPTIONS when playback is
stopped.
4
Press V/v repeatedly to select
"MEM SEL", then press ENTER.
5
Press V/v repeatedly to select the
memory you want, then press
ENTER.
To exit the options menu, press
OPTIONS.