Sony MHC-V3 Panduan Petunjuk Pengoperasian - Halaman 30

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Sony MHC-V3. Sony MHC-V3 36 halaman.

Sony MHC-V3 Panduan Petunjuk Pengoperasian

Messages

One of the following messages may
appear or flash in the display panel during
operation.
CANNOT PLAY
A disc that cannot be played back was
inserted.
DEVICE ERROR
The USB device could not be recognized
or an unknown device is connected.
DEVICE FULL
The memory of the USB device is full.
FATAL ERROR
The USB device was removed during
transfer or erase operation, and may have
been damaged.
FOLDER FULL
You cannot transfer onto the USB device
because the number of folder has reached
its maximum.
NO DISC
There is no disc on the disc tray.
NO MEMORY
The memory selected for playback or
transfer has no memory media inserted in
the USB device.
NO STEP
All of the programmed steps have been
erased.
NO TRACK
No playable file is loaded in the system.
NoDEVICE
No USB device is connected.
NOT SUPPORTED
An unsupported USB device is connected,
or the USB device is connected through a
USB hub.
NOT USE
You tried to perform a specific operation
under conditions where that operation is
prohibited.
30
GB
OFF TIME NG
The on time and off time of Play Timer
are the same.
PROTECT
The USB device is write-protected.
PUSH STOP
You tried to perform an operation that can
be performed only when the playback is
stopped.
READING
The system is reading information of the
disc or USB device. Some operations are
not available.
REC ERROR
The transfer did not start, stopped
partway, or otherwise could not be
performed.
STEP FULL
You tried to program more than 25 steps.
TRACK FULL
You cannot transfer onto the USB device
because the number of file has reached its
maximum.

Precautions

When carrying the unit
Perform the following procedure to
protect the disc mechanism.
Use the buttons on the unit to perform this
operation.
1
Press "/1 to turn on the system.
2
Remove the disc.
Press Z to open and close the disc tray.
Wait until "NO DISC" appears in the
display panel.
3
Unplug the AC power cord.
Notes on discs
• Before playing, wipe the disc with a cleaning
cloth from the center outward to the edge.