Sony MHC-W55 Panduan Petunjuk Pengoperasian - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Sony MHC-W55. Sony MHC-W55 31 halaman.

Recording a CD:
Selecting Tape
Length (tape select
edit)
You can have the stereo system select and
indicate the most suitable tape length for
recording each disc automatically.
You cannot use Tape Select Edit for discs
which contain 21 tracks or more.
SYSTEM
POWER m ON
3
Æ
»
p
0
)
r
P
6
7
1
Press FUNCTION repeatedly until "CD"
appears in the display.
2
Press § OPEN/CLOSE/EX-CHANGE
and place a CD. Then, press § OPEN/
CLOSE/EX-CHANGE again to close the
CD tray.
If the button for the disc tray containing
the CD you want to record is not lit
green, press DISC SKIP repeatedly so
that it lights green.
3
Press EDIT.
"TAPE SELECT" appears and the player
divides the selections automatically.
Then the display changes as follows:
CD
1
2
3
4
5
6
7
8
63
125
250
500
1k
2k
4k
ALL DISCS
Tape length required
CD
1
2
3
4
5
6
7
8
63
125
250
500
1k
2k
4k
ALL DISCS
4
Insert a blank tape of the indicated
length (or longer) into deck B.
16
Chapter 4: the Tape Player
5
Select dual or single-sided recording.
To record
One side of the tape
Both sides*
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
6
Press CD SYNCHRO.
Deck B stands by for recording.
7
Press P PAUSE to release recording
pause.
Recording starts. After about 10
seconds, the CD starts playing.
1
p
»
P
p
2
»
Æ
p
p
0
)
4
5
A
VOLUME
DOLBY NR B OFF
8k
16k(Hz)
DBFB
A
VOLUME
DOLBY NR B OFF
8k
16k(Hz)
DBFB
Recording a CD:
Press DIRECTION
Specifying Tape
MODE to select
A
Length (time edit)
ß or RELAY
You can have the stereo system create
programmes that will fit the tape length.
For example, if you use a 40-minute tape to
record a 46-minute CD, the CD player will
automatically choose tracks that will fit
within the 40-minutes, filling as much of
the tape as possible. The player will not
programme those tracks beyond track
number 20. Use the buttons on both the
unit and the remote to do this operation.
3,
5,
6
1
Press FUNCTION repeatedly until "CD"
appears in the display.
2
Press § OPEN/CLOSE/EX-CHANGE
and place a CD.
Then, press § OPEN/CLOSE/
EX-CHANGE again to close the CD tray.
If the button for the disc tray containing
the CD you want to record is not lit
green, press DISC SKIP repeatedly so
that it lights green.
SYSTEM
POWER m ON
»
P
p
Æ
»
Æ
»
p
p
0
)
0
)
r
P
9
10
7
DOLBY NR
=/+
CHECK
1
4
p
2
p
8