Sony MZ-R500 Panduan Petunjuk Pengoperasian - Halaman 26

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Sony MZ-R500. Sony MZ-R500 40 halaman. Marketing specifications
Juga untuk Sony MZ-R500: Panduan Petunjuk Pengoperasian (40 halaman), Panduan Petunjuk Pengoperasian (20 halaman), Garansi Terbatas (1 halaman), Spesifikasi (2 halaman)

Sony MZ-R500 Panduan Petunjuk Pengoperasian
2
Press >MENU. repeatedly
until "Erase" flashes in the display,
and then press ENTER.
"Erase?" and "ENTER" appear
alternately in the display.
To cancel erasing, press x.
3
Press ENTER again.
"Edit" flashes in the display, and all
the tracks will be erased.
When erasing is complete, "BLANK"
appears in the display.

Adding a track mark

You can add track marks so that the part
after the new track mark is counted as a
new track.
The track numbers will increase as
follows.
Add a track mark
1
1
2
Track numbers increase
1
While playing or pausing an MD,
press T MARK at the point you want
to mark.
"MK ON" appears in the display, and
a track mark is added. The track
number will increase by one.
26
-GB
2
3
4
3
4
5
T MARK
To add track marks while
recording
Press T MARK at the point you want to
add a track mark.
Note
You cannot add track marks during synchro-
recording.

Erasing a track mark

When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark. The track
numbers will change as follows.
Erase a track mark
1
2
1
2
Track numbers decrease
.
1
While playing the track with the track
mark you want to erase, press X to
pause.
3
4
3
X
T MARK