Sony PFV-SP3300 Panduan Instalasi - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem stereo Sony PFV-SP3300. Sony PFV-SP3300 16 halaman. Signal processing unit, backup power supply unit
Juga untuk Sony PFV-SP3300: Panduan Pengoperasian (18 halaman), Panduan Pengoperasian (18 halaman), Panduan Pemeliharaan (40 halaman)
Halaman Cetak
1-5. Installing Optional Board
1-5. Installing Optional Board
The optional board can be installed in any empty slot of
PFV-SP3300.
Installing Main Board (Front side)
1. Turn off the power switches of PFV-SP3300.
n
Turn off both of the power switches when the backup
power supply unit is installed.
2. Remove the front panel. (Refer to Section 1-4.)
3. Remove the four screws and remove the board
retainer.
Power switches
B 3x5
Board retainer
1-4 (E)
B 3x5
4. Insert the main board fully into the slot along the board
guides and close the board lever in the direction
indicated by arrow 1.
5. Stick the slot label supplied with the PFV-SP3300 onto
the board lever.
n
Attach the supplied slot label to the position shown in
the figure.
Do not attach the slot label below the position. The
slot label may be concealed by the board retainer.
Slot label
1
Board lever
Board retainer
6. Reinstall the board retainer.
7. Reinstall the front panel.
n
When removing the main board, turn the board lever in the
direction of the arrow 2 , and pull out the board toward
you.
2
Board lever
Board guides
PFV-SP3300