Sony RCD-W222ES - Cd/cdr Recorder Panduan Petunjuk Pengoperasian - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Sony RCD-W222ES - Cd/cdr Recorder. Sony RCD-W222ES - Cd/cdr Recorder 32 halaman. Limited warranty (es products)
Juga untuk Sony RCD-W222ES - Cd/cdr Recorder: Spesifikasi (2 halaman), Garansi Terbatas (1 halaman), Panduan Petunjuk Pengoperasian (34 halaman)
Halaman Cetak
To locate
The next or
succeeding
tracks
The beginning
of the current or
preceding tracks
A specific track
number or track
name directly
Tip
To pause playing at the beginning of a track, turn
AMS (or press ./> on the remote) after
pausing playback.
Playing directly using the
number buttons Z
You can playback a track directly by using the
number buttons. Press the track number you
want to play. When you select a track number
over 10, press >10 first, then the corresponding
number buttons.
Example:
To enter number 15, press >10, then 1 and 5.
12
Do the following:
During playback, turn AMS
clockwise (or press > on the
remote repeatedly) until you find the
track.
During playback, turn AMS
counterclockwise (or press . on
the remote repeatedly) until you find
the track.
In stop mode, turn AMS (or press
./> on the remote repeatedly)
until you find the track number or
track name, and press N (or
the remote).
Locating a Particular
Point in a Track
You can locate a particular point in a track
during playback or playback pause.
Before using the remote, set SELECT to CD
for operations on DECK A, or to CDR for
operations on DECK B.
H
on
SELECT
m/M
To locate a
point
While
monitoring the
sound
While
observing the
display
Tip
"-Over-" appears if the disc reaches the end. Turn
AMS counterclockwise (or press . or m on the
remote).
Note
Tracks that are only a few seconds long may be too
short to scan using the search function. For such
tracks, it is better to play the disc at normal speed.
Z
Do the following
During playback, press and hold
m or M on the remote until you
find the point.
During pause, press and hold m or
M on the remote until you find the
point. You will not hear the sound
during operation.