Sony RDP-XF300iPN Panduan Referensi

Jelajahi secara online atau unduh pdf Panduan Referensi untuk Sistem stereo Sony RDP-XF300iPN. Sony RDP-XF300iPN 2 halaman. Personal audio system
Juga untuk Sony RDP-XF300iPN: Petunjuk Pengoperasian (2 halaman)

Halaman Cetak

Personal Audio

Reference Guide

System

Printed in China

RDP-XF300iPN

— with respect to the supply to the public of the RLAN

WARNING

access to telecom networks and services, by the

Ministerial Decree 28.5.2003, as amended, and Art.

25 (general authorization for electronic communications

To reduce the risk of fire or electric shock, do

networks and services) of the Code of electronic

not expose this apparatus to rain or moisture.

communications.

To reduce the risk of fire, do not cover the ventilation of

On Copyrights and Licenses

the apparatus with newspapers, tablecloths, curtains, etc.

The Bluetooth® word mark and logos are owned by the

And do not place lighted candles on the apparatus.

Bluetooth SIG, Inc. and any use of such marks by Sony

To reduce the risk of fire or electric shock, do not expose

Corporation is under license. Other trademarks and trade

this apparatus to dripping or splashing, and do not place

names are those of their respective owners.

objects filled with liquids, such as vases, on the apparatus.

iPad, iPhone, iPod, iPod nano, and iPod touch are

Do not install the appliance in a confined space, such as a

trademarks of Apple Inc., registered in the U.S. and other

bookcase or built-in cabinet.

countries.

Lightning is a trademark of Apple Inc.

Do not expose the batteries (battery pack or batteries

"Made for iPod, " "Made for iPhone, " and "Made for iPad"

installed) to excessive heat such as sunshine, fire or the like

mean that an electronic accessory has been designed to

for a long time.

connect specifically to iPod, iPhone, or iPad, respectively, and

As the main plug is used to disconnect the unit from the

has been certified by the developer to meet Apple

mains, connect the unit to an easily accessible AC outlet.

performance standards. Apple is not responsible for the

Should you notice an abnormality in the unit, disconnect

operation of this device or its compliance with safety and

the main plug from the AC outlet immediately.

regulatory standards. Please note that the use of this accessory

The unit is not disconnected from the AC power source

with iPod, iPhone, or iPad may affect wireless performance.

(mains) as long as it is connected to the wall outlet, even if

Use of this radio equipment is not allowed in the

the unit itself has been turned off.

geographical area within a radius 20km from the centre of

The nameplate and important information concerning

Ny-Alesund, Svalbard in Norway.

safety are located on the bottom exterior of the main unit

and on the surface of the AC adaptor.

Precautions

CAUTION

Danger of explosion if battery is incorrectly replaced.

 To disconnect AC power, grasp the plug itself, not the cord.

Replace only with the same type.

 Since a strong magnet is used for the speaker, keep credit

Notice for customers: the following information is

cards using magnetic coding or spring-wound watches,

only applicable to equipment sold in countries

CRT-based TVs, or projectors, etc., away from the unit

applying EU directives

to prevent possible damage from the magnet.

This product has been manufactured by or on behalf of

 Do not leave the unit in a location near a heat source

Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-

such as a radiator or airduct, or in a place subject to

0075 Japan. Inquiries related to product compliance based

direct sunlight, excessive dust, mechanical vibration, or

on European Union legislation shall be addressed to the

shock.

authorized representative, Sony Deutschland GmbH,

 Allow adequate air circulation to prevent internal heat

Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any

build-up. Do not place the unit on a surface (a rug, a

service or guarantee matters, please refer to the addresses

blanket, etc.) or near materials (a curtain) which might

provided in the separate service or guarantee documents.

block the ventilation holes.

 Should any solid object or liquid fall into the unit,

unplug the unit and have it checked by qualified

personnel before operating it any further.

Hereby, Sony Corp., declares that this equipment is in

 During a thunderstorm, do not touch the antenna

compliance with the essential requirements and other

(aerial) and plug.

relevant provisions of Directive 1999/5/EC. For details,

 Do not touch the unit with wet hands.

please access the following URL:

http://www.compliance.sony.de/

 Do not place the unit anywhere near water.

NOTES ON LITHIUM BATTERY

Use of the RLAN network is governed:

 Wipe the battery with a dry cloth to assure a good

— with respect to private use, by the Legislative Decree of

contact.

1.8.2003, no. 259 ("Code of Electronic

 Be sure to observe the correct polarity when installing

Communications"). In particular Article 104 indicates

the battery.

when the prior obtainment of a general authorization is

 Do not hold the battery with metallic tweezers,

required and Art. 105 indicates when free use is

otherwise a short-circuit may occur.

permitted;

Disposal of Old Electrical & Electronic

Note

Equipment (Applicable in the European

 In the Reference Guide, "iPod" is used as a general

4-461-401-33(1)

Union and other European countries with

reference to functions on an iPod, iPhone or iPad, unless

separate collection systems)

otherwise specified by the text or illustrations.

If you have any questions or problems concerning your

unit, please consult your nearest Sony dealer.

This symbol on the product or on its packaging indicates

that this product shall not be treated as household waste.

General information

Instead it shall be handed over to the applicable collection

point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of

Specifications

correctly, you will help prevent potential negative

consequences for the environment and human health,

which could otherwise be caused by inappropriate waste

iPod

handling of this product. The recycling of materials will

DC out: 5 V

help to conserve natural resources. For more detailed

MAX: 2.1 A

information about recycling of this product, please contact

your local Civic Office, your household waste disposal

Radio

service or the shop where you purchased the product.

Frequency range

Applicable accessory: Remote control

Band

Disposal of waste batteries (applicable

in the European Union and other

European countries with separate

Bluetooth

collection systems)

Output

Bluetooth Specification Power Class 2

This symbol on the battery or on the packaging indicates

Maximum communication range

that the battery provided with this product shall not be

Line of sight approx. 10 m*

treated as household waste.

On certain batteries this symbol might be used in

Frequency band

combination with a chemical symbol. The chemical

2.4 GHz band (2.4000 GHz – 2.4835 GHz)

symbols for mercury (Hg) or lead (Pb) are added if the

Communication System

battery contains more than 0.0005% mercury or 0.004%

Bluetooth Specification Version 2.1 + EDR (Enhanced

lead.

Data Rate)

By ensuring these batteries are disposed of correctly, you

Compatible Bluetooth Profiles *

will help prevent potentially negative consequences for the

A2DP (Advanced Audio Distribution Profile)

environment and human health which could otherwise be

AVRCP*

caused by inappropriate waste handling of the battery. The

Supported codec *

recycling of the materials will help to conserve natural

resources.

SBC (Subband Codec)

The actual range will vary depending on factors such as obstacles

In case of products that for safety, performance or data

between devices, magnetic fields around a microwave oven,

integrity reasons require a permanent connection with an

static electricity, reception sensitivity, aerial performance,

incorporated battery, this battery should be replaced by

operating system, application software, etc.

qualified service staff only.

Bluetooth standard profiles provide the specifications for

To ensure that the battery will be treated properly, hand

Bluetooth communication between devices.

over the product at end-of-life to the applicable collection

Some operations may not be available for some models of iPod.

point for the recycling of electrical and electronic

Codec: Audio signal compression and conversion format

equipment.

General

For all other batteries, please view the section on how to

remove the battery from the product safely. Hand the

Speaker

battery over to the applicable collection point for the

Woofer: Approx. 76 mm dia. × 2

recycling of waste batteries.

Tweeter: Approx. 25 mm dia. × 2

For more detailed information about recycling of this

Input

product or battery, please contact your local Civic Office,

AUDIO IN jack (ø 3.5 mm stereo minijack)

your household waste disposal service or the shop where

Impedance: 50 kΩ

you purchased the product.

Average input level: 245 mV

Power output

On Bluetooth communication

20 W + 20 W (at 1% harmonic distortion) (with AC



Bluetooth wireless technology operates within a range of

adaptor)

about 10 meters.

7 W + 7 W (at 1% harmonic distortion) (with rechargeable

Maximum communication range may vary depending

battery)

on obstacles (human body, metal, wall, etc.) or

Power source

electromagnetic environment.

Rated external power source: DC IN 20 V (with supplied

AC adaptor (AC 100 V - 240 V, 50 Hz/60 Hz) or

The unit

rechargeable battery pack NH-300RDP)

Battery life*:

Approx. 7 hours (playback of iPod)

Approx. 7 hours (FM reception)

Approx. 6.5 hours (Bluetooth playback)

Steel cabinet

Dimensions

Optimal performance

Approx. 356.0 mm × 168.1 mm × 121.7 mm (w/h/d)

Limited performance

(incl. projecting parts and controls)



The following conditions may affect the sensitivity of

Mass

Bluetooth communication.

Approx. 2.6 kg

— There is an obstacle such as a person, metal, or wall

Supplied accessories

between this unit and iPod.

Remote control (with a lithium battery) (1)

— A device using 2.4 GHz frequency, such as a wireless

AC adaptor (1)

LAN device, cordless telephone, or microwave oven,

AC power cord (1)

is in use near the unit.

Reference Guide (this document) (1)

— The unit is installed on a shelf made of steel.



Because Bluetooth devices and wireless LAN

Measured by Sony standards. The actual battery life may vary

(IEEE802.11b/g/n) use the same frequency, microwave

depending on the circumstance of the unit.

interference may occur and resulting in communication

Compatible iPod/iPhone/iPad

speed deterioration, noise, or invalid connection if this

models

unit is used near a wireless LAN device. In such a case,

perform the following.

The compatible iPod/iPhone/iPad models are as follows.

— Use this unit at least 10 m away from any wireless

Update the software of the iPod/iPhone/iPad to the latest

LAN device.

version before using it with this unit.

— If this unit is used within 10 m of a wireless LAN

Lightning connector works with

device, turn off the wireless LAN device.

iPhone 5s

— Install this unit and iPod as near to each other as

iPhone 5c

possible.

iPhone 5



Microwaves emitting from a Bluetooth device may affect

iPad Air

the operation of electronic medical devices. Turn off this

iPad mini with Retina display

unit and iPod in the following locations, as it may cause

iPad (4th generation)

an accident.

iPad mini

— where inflammable gas is present, in a hospital, train,

iPod touch (5th generation)

airplane, or a petrol station

iPod nano (7th generation)*

— near automatic doors or a fire alarm

Wireless music streaming compatible models



This unit supports security capabilities that comply with

iPhone 5s

the Bluetooth standard to provide a secure connection

when the Bluetooth wireless technology is used, but

iPhone 5c

security may be insufficient, depending on the setting.

iPhone 5

iPhone 4s

Be careful when communicating using Bluetooth

wireless technology.

iPhone 4

iPhone 3GS



We do not take any responsibility for leakage of

information during Bluetooth communication.

iPhone 3G

iPad Air



Connection with all Bluetooth devices cannot be

iPad mini with Retina display

guaranteed.

iPad (4th generation)

— A device featuring Bluetooth function is required to

iPad mini

conform to the Bluetooth standard specified by

iPad (3rd generation)

Bluetooth SIG, Inc. and be authenticated.

iPad 2

— Even if the connected device conforms to the above

iPad

mentioned Bluetooth standard, some devices may not

iPod touch (5th generation)

be connected or work correctly, depending on the

iPod touch (4th generation)

features or specifications of the device.

iPod touch (3rd generation)



Depending on the device to be connected, it may require

iPod touch (2nd generation)

some time to start communication.

iPod nano (7th generation)

The remote command of "MENU, " ", " ", " and "ENTER" will

only work with iPhone, iPad, and iPod touch.

Design and specifications are subject to change without

notice.

Troubleshooting

General

The power does not turn on when the AC adaptor is

connected.

 Make sure the AC adaptor is connected to the wall outlet

firmly.

The rechargeable battery is depleted.

 Connect the AC adaptor to charge the battery.

There is no sound.

Frequency

Frequency step

 Adjust VOLUME +/− (VOL +/− on the remote).

87.5 MHz - 108 MHz

0.05 MHz

Noise is heard.

 Ensure that the unit is not near in-use portable phones,

etc.

The power will not turn on when the AC adaptor is

disconnected.



The Power Off Hold function may be set. In this case,

cancel the Power Off Hold function. (See "Power Off

Hold function. " )



The rechargeable battery may be depleted. In this case,

connect the AC adaptor to charge the battery. (See "To

use the AC adaptor. " )

"ERROR" appears in the display and the unit turns off

automatically.



If this symptom occurs frequently, consult your nearest

Sony dealer.

(Audio/Video Remote Control Profile)

When using an iPod on the Dock

There is no sound.



Make sure the iPod is connected firmly.



Make sure that the function for iPod is activated.

Operation is not performed.



Make sure the iPod is connected firmly.



Check that the iPod is compatible with this unit. (See

"Lightning connector works with. " )

The iPod does not charge.



Make sure the iPod is connected firmly.



Make sure the AC adaptor is connected firmly.



Check that the iPod is compatible with this unit. (See

"Lightning connector works with. " )

When using the Bluetooth connection

There is no sound.



Ensure that this unit is not too far from the iPod, or this

unit is not receiving interference from a wireless LAN,

other 2.4 GHz wireless device, or microwave oven.



Check that the Bluetooth connection is made properly

between this unit and the iPod.



Pair this unit and the iPod again.



Keep away from metal objects or surfaces.



Make sure that the Bluetooth function is activated.

Sound skips or the correspondence distance is short.



If a device that generates electromagnetic radiation, such

as a wireless LAN, other Bluetooth device(s), or a

microwave oven is nearby, move away from such

sources.



Remove any obstacle between this unit and the iPod or

move away from the obstacle.



Locate this unit and the iPod as close to each other as

possible.



Re-position this unit.



Re-position the iPod.

Connecting cannot be done.



Perform pairing again. (See "To pair with an iPod. " )



Check that the iPod is compatible with this unit. (See

"Wireless music streaming compatible models. " )

Pairing cannot be done.



Bring this unit and the iPod closer together.



Delete the unit from the iPod and perform pairing again.



Check that the iPod is compatible with this unit. (See

"Wireless music streaming compatible models. " )

Radio

Reception is poor.



Extend the aerial to its full length, and orientate for best

FM reception.

The sound is weak or is of poor quality.



If the unit is close to a TV, move it away from the TV.

The TV picture is unstable.



If you are listening to an FM program near a TV with an

indoor aerial, move the unit away from the TV.

Audio-in

There is no sound.



Make sure the audio connecting cable is connected

firmly.



Make sure that the connected optional component is in

playback mode.



Make sure that the Audio-in function is activated.

The sound is low.



Check the volume of the connected optional component.

Remote control

When the battery becomes almost fully depleted, "LOW

BATT" flashes and the unit will turn off. To charge the

The remote does not function.

battery, connect the AC adaptor. (See "To use the AC



The unit cannot be turned on with the remote when the

adaptor. " )

AC adaptor is disconnected. In this case, press  on

 

the unit to turn it on.



Replace the battery in the remote with a new one if it is

weak.



Make sure that you are pointing the remote at the remote

Notes

sensor on the unit.



The remaining battery power will not be indicated when



Do not cover or place any objects directly in front of the

the unit is turned off.

(Remote sensor) receiver.



The unit requires at least 30 minutes to charge the



Remove any obstacles in the path of the remote and the

battery if "LOW BATT" appears.

unit.



The battery indicator shows approximate remaining



Make sure the remote sensor is not exposed to strong

battery power.

light such as direct sunlight or fluorescent lamp light.



Operating conditions will affect the rate of battery

If the problem persists, consult your nearest Sony dealer.

depletion.

When to replace the rechargeable battery

Preparations

Repeated recharging causes the duration of the battery

power to decrease over time. Replace the battery pack

when its duration becomes half the usual period, even after

Power source

charging it fully.

Note



The rechargeable battery pack is not a commercially

Auto power off

available product. To purchase rechargeable battery pack

After playback of the music (from an iPod on the Dock,

(NH-300RDP), consult your nearest Sony dealer.

Bluetooth connection, or optional component connected

to the AUDIO IN jack) has finished, and if no operation is

To replace the rechargeable

performed for about 20 minutes, the unit will

battery

automatically turn off.

Notes

Remove the screw of the battery compartment at



While the unit is turned on, if no operation is performed

the bottom of the unit, and open the lid.

for more than about 30 seconds, the display turns off. In

this case, press SOUND to turn on the display again.



The unit cannot be turned on with the remote when the

AC adaptor is disconnected.

To use the AC adaptor

Connect the supplied AC power cord to the AC

adaptor.

Connect the AC adaptor to the DC IN 20V jack

on the back of this unit firmly and plug it into a

Disconnect the connector of the battery pack and

wall outlet.

pull it out.

Note on the AC adaptor



Use the supplied Sony AC adaptor only. The polarity of

the plugs of other manufacturers may be different.

Failure to use the supplied AC adaptor may cause the

unit to malfunction.

Confirm that charging has started.

When charging starts, the battery indicator appears.

Insert a new battery pack and connect its

While charging, the charging indicator animation

connector to the jack.

loops.

Replace the battery compartment lid and tighten

When the unit is turned off

the screw.

Notes

 When replacing the battery pack, place a soft cloth etc.,

under the unit.

When charging completes, the full battery indicator

 Turn off the unit and disconnect the AC adaptor before

appears for a while, and then disappears.

removing the old battery pack.



 Charge a new battery pack before use. For details, see

"To use the AC adaptor. "

Notes

Remote control



If you connect the AC adaptor when the battery is fully

charged, the full battery indicator appears for a while,

Before using the supplied remote for the first time, remove

and then disappears.

the insulation film.



If you connect the AC adaptor when the battery power is

Aim the remote at the

(Remote sensor) of the unit.

low, charging starts and the low battery and charging

indicator animation loops.

The unit cannot be operated without the AC adaptor while

the low battery indicator appears.

 

When the unit is turned on

When to replace the battery

With normal use, the battery (CR2025) should last for

about 6 months. When the remote can no longer operate

the unit, replace the battery with a new one.

 side facing up

When charging completes, the full battery indicator

appears.

Note



It will take approximately 6 hours to fully charge the

 If you are not going to use the remote for a long time,

battery.

remove the battery to avoid any damage that may be caused

by leakage or corrosion.

To use the rechargeable battery

You can operate the unit with the rechargeable battery

instead of the AC adaptor.

Continued on the reverse side

Note



The maximum output volume will be lower when the

AC adaptor is disconnected.

To check the remaining power of the battery

The remaining power of the battery will be indicated when

the unit is turned on. As the remaining battery power

depletes, the battery indicator decreases.

Level 1

Level 2

Level 3

Level 4