Sony SA-VE345 Petunjuk Pengoperasian

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian untuk Sistem stereo Sony SA-VE345. Sony SA-VE345 2 halaman. Micro satellite system
Juga untuk Sony SA-VE345: Petunjuk & Panduan Pengoperasian (2 halaman), Petunjuk & Panduan Pengoperasian (2 halaman), Panduan Pemilik (8 halaman), Panduan Servis (16 halaman), Panduan Servis (16 halaman)

Halaman Cetak

Micro Satellite Speaker System

SA-VE345

4-244-848-11(1)

Surround (Right)

English

Owner's Record

About this manual

The model and serial numbers are located on the

rear of the unit. Record the serial number in the

The SA-VE345 is a 5.1 channel speaker system consisting

space provided below. Refer to them whenever

of two front speakers, two surround speakers, one center

you call upon your Sony dealer regarding this

speaker, and one subwoofer. It supports Sony Digital

product.

Cinema Sound, Dolby* Pro Logic, and Dolby Digital etc.,

and is thus geared towards the enjoyment of movies.

Model No. SA-VE345

* "Dolby" and the double-D symbol are trademarks of

Serial No.

Dolby Laboratories.

WARNING

Precautions

To prevent fire or shock hazard, do not expose the

unit to rain or moisture.

On safety

To prevent fire, do not Cover the ventilation of the

• Before operating the system, be sure that the operating

apparatus with news papers, table-cloths, curtains, etc.

voltage of the system is identical with that of your local

And don't place lighted candles on the apparatus.

power supply.

To prevent fire or shock hazard, do not place objects

• The unit is not disconnected from the AC power source

filled with liquids, such as vases, on the apparatus.

(mains) as long as it is connected to the wall outlet,

To avoid electrical shock, do not open the cabinet. Refer

even if the unit itself has been turned off.

servicing to qualified personnel only.

• Unplug the system from the wall outlet if it is not to be

used for an extended period of time. To disconnect the

Do not install the appliance in a confined space, such

cord, pull the cord by grasping the plug. Never pull

as a bookcase or built-in cabinet.

the cord itself.

• Should any liquid or solid object fall into the system,

unplug the system's power cord and have the system

NOTICE FOR THE CUSTOMERS IN THE USA

checked by qualified personnel before operating it any

further.

• AC power cord must be changed only at the qualified

service shop.

On operation

• Do not drive the speaker system with a continuous

wattage exceeding the maximum input power of the

system.

• If the polarity of the speaker connections are not

correct, the bass tones will be weak and the position of

This symbol is intended to alert the user to

the various instruments obscure.

the presence of uninsulated "dangerous

• Contact between bare speaker wires at the speaker

voltage" within the product's enclosure

terminals may result in a short-circuit.

that may be of sufficient magnitude to

• Before connecting, turn off the amplifier to avoid

constitute a risk of electric shock to persons.

damaging the speaker system.

• The speaker grille cannot be removed. Do not attempt

This symbol is intended to alert the user to

to remove the grille on the speaker system. If you try

the presence of important operating and

to remove it, you may damage the speaker.

maintenance (servicing) instructions in the

The volume level should not be turned up to

•

literature accompanying the appliance.

the point of distortion.

CAUTION

You are cautioned that any changes or modification not

If you encounter color irregularity on a

expressly approved in this manual could void your

nearby TV screen

authority to operate this equipment.

This speaker system is magnetically shielded to allow it

Note to CATV system installer:

to be installed near a TV set. However, color

irregularities may still be observed on certain types of TV

This reminder is provided to call CATV system installer's

sets.

attention to Article 820-40 of the NEC that provides

guidelines for proper grounding and, in particular,

If color irregularity is observed...

specifies that the cable ground shall be connected to the

c Turn off the TV set, then turn it on again after 15 to

grounding system of the building, as close to the point of

30 minutes.

cable entry as practical.

If color irregularity is observed again...

CAUTION

c Place the speakers further away from the TV set.

Use of this applicance with some systems may present a

shock or fire hazard. Do not use with any units which

If howling occurs

have the following marking located near output.

Reposition the speakers or turn down the volume on the

WARNING: HAZARDOUS ENERGY!

amplifier.

NOTICE FOR THE CUSTOMERS IN CANADA

On placement

CAUTION

• Do not set the speakers in an inclined position.

• Do not place the speakers in locations that are:

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS

POLARIZED AC PLUG WITH AN EXTENSION CORD,

— Extremely hot or cold

RECEPTACLE OR OTHER OUTLET UNLESS THE

— Dusty or dirty

BLADES CAN BE FULLY INSERTED TO PREVENT

— Very humid

BLADE EXPOSURE.

— Subject to vibrations

— Subject to direct sunlight

ENERGY STAR

is a U.S. registered mark.

• Use caution when placing the speaker on a specially

As ENERGY STAR

Partner, Sony

treated (waxed, oiled, polished, etc.) floor, as staining

Corporation has determined that this

or discoloration may result.

product meets the ENERGY STAR

guidelines for energy efficiency.

On cleaning

Clean the speaker cabinets with a soft cloth lightly

moistened with a mild detergent solution or water. Do

not use any type of abrasive pad, scouring powder or

solvent such as alcohol or benzine.

If you have any questions or problems concerning your

speaker system, please consult your nearest Sony dealer.

2003 Sony Corporation

Printed in Japan

Subwoofer

Center

Front (Right)

Front (Left)

LINE IN

3.5 m

(11.5 ft.)

FRONT

Amplifier

eE Ee

WOOFER OUT

CENTER

SURROUND

10 m

(32.8 ft.)

Surround (Left)

Foot pads

Hooking up the system

Connect the speaker system to the speaker output

terminals of an amplifier.

Make sure power to all components (included the

subwoofer) is turned off before starting the hook-up.

HookupA

Usually, connect by this method.

This configuration is used when the amplifier is

connected to a DVD player, LD player, VCR or other

video devices.

HookupB

Try this configuration instead of "HookupA" when

there are no jacks on the amplifier for a subwoofer.

An optional specified speaker cord (2.5 m 2)(8.2 ft.

is necessary when connecting this way.

Notes (C)

• Make sure the plus (+) and the minus (–) terminals on

the speakers are matched to the corresponding plus (+)

and minus (–) terminals on the amplifier.

• Be sure to tighten the screws of the speaker terminals

securely as loose screws may become a source of noise.

• Make sure all connections are firm. Contact between

bare speaker wires at the speaker terminals may cause

a short-circuit.

• For details regarding the connections on the amplifier

side, refer to the manual that was provided with your

amplifier.

Tip

Black or black striped wires are minus (–) in polarity, and

should be connected to the minus (–) speaker terminals.

Positioning the speakers

Location of each speaker (D)

Each speaker should face the listening position. Better

surround effect will result if all speakers are set at the

same distance from the listening position.

Place the front speakers at a suitable distance to the left

and right of the television.

Place the subwoofer on either side of the television.

Place the center speaker on the top-center of the TV set.

The placement of surround speakers greatly depends on

the configuration of the room. The surround speakers

may be placed on both sides of the listening position A

or behind the listening position B.

Setting the speakers

To prevent speaker vibration or movement while

listening, attach the supplied foot pads to the bottom

four corners of the center speaker, front speakers, and

surround speakers (

Setting the center speaker (F)

Set the center speaker firmly on top of the TV set, making

sure it is completely level.

Setting other speakers (G)

For greater flexibility in the positioning of the speakers,

use the optional WS-FV10D or WS-WV10D speaker stand

(available only in certain countries).

Tip

The height of the front speakers should be adjusted to

about the center of the TV screen (

Printed on 100% recycled paper using

VOC (Volatile Organic Compound)-free

vegetable oil based ink.

Front (Right)

Center

3.5 m

2.5m (8.2 ft.)

(11.5 ft.)

2.5m (8.2 ft.)

FRONT

SPEAKER

OUT

Amplifier

eE Ee

CENTER

SURROUND

10m

(32.8 ft.)

Surround (Right)

Surround (Left)

WS-FV10D

Foot pads

WS-WV10D

(for surround speakers)

Setting the amplifier

When connecting to an amplifier with internal multi

channel decoders (Dolby Digital, DTS**, etc.), you should

use the setup menus for the amplifier to specify the

parameters of your speaker system.

See the table below for the proper settings. For details on

the setting procedure, refer to the manual that was

provided with your amplifier.

Select Micro Satellite Position if a Sony amplifier

provides it.

When "Hookup A" is used

(Speaker setup)

For

Set to

Front speakers

SMALL

)

Center speaker

SMALL

Surround speakers

SMALL

Subwoofer

ON (or YES)

When "Hookup B" is used

(Speaker setup)

For

Set to

Front speakers

LARGE

Center speaker

SMALL

Surround speakers

SMALL

Subwoofer

OFF (or NO)

If you use the amplifier with adjustable crossover

frequency, it is recommended to select 150 Hz (or close to

this figure) as the crossover frequency for your front,

center, and surround speakers.

** "DTS" and "DTS Digital Surround" are registered

trademarks of Digital Theater Systems, Inc.

Listening to the sound (

First, turn down the volume on the amplifier. The

volume should be set to minimum before you begin

playing the program source.

Turn on the amplifier and select the

program source.

Press POWER on the subwoofer.

The ON/STANDBY indicator on the

subwoofer lights up green.

Play the program source.

Power turns on and off automatically

(J)

power on/off function

When the subwoofer is on (i.e, the ON/STANDBY

indicator lights up green) and there is no signal input for

a few minutes, the ON/STANDBY indicator changes to

red and the subwoofer enters power saving mode. While

in this mode a signal is input to the subwoofer, the

subwoofer automatically turns on (auto power on/off

function).

To turn this feature off, slide the POWER SAVE switch

on the rear panel to OFF.

Note

If you turn down the volume level of the amplifier too

low, the auto power on/off function may activate,

causing the subwoofer to enter power saving mode.

Front (Left)

3.5 m

(11.5 ft.)

Subwoofer

ON/STANDBY indicator

Adjusting the subwoofer (I)

Set MODE according to the program

source as follows:

Source

DVD, LD, video cassette

or other video source

MD, CD, cassette tape

or other audio source

Rotate LEVEL to adjust the volume.

Set the volume level to best suit your

preference according to the program

source.

Notes

• Some amplifier functions for enhancing the sound may

cause distortion in the subwoofer. If such distortion

occurs, turn off those functions.

• To enjoy high-quality sound, do not turn the

subwoofer volume too high.

• The bass sound is enhanced in MOVIE mode rather

than in MUSIC mode. Therefore, if you change the

mode to MOVIE while listening to some sources that

do not include the bass sound, you may not be able to

get the effect.

Troubleshooting

Should you encounter a problem with your speaker

system, check the following list and take the indicated

measures. If the problem persists, consult your nearest

)

Sony dealer.

There is no sound from the speaker system.

•Make sure all the connections have been

correctly made.

•Make sure the volume on the amplifier has

been turned up properly.

•Make sure the program source selector on the

amplifier is set to the proper source.

•Check if headphones are connected. If they

are, disconnect them.

There is distortion in the subwoofer sound

output.

•Check if any sound-enhancing functions have

been activated on the amplifier. If they have,

turn them off.

— Auto

There is hum or noise in the speaker output.

•Make sure all the connections have been

correctly made.

•Make sure none of the audio components are

positioned too close to the TV set.

The sound has suddenly stopped.

•Make sure all the connections have been

correctly made. Contact between bare

speaker wires at the speaker terminals may

cause a short-circuit.

Center

Subwoofer

Front (Left)

Front (Right)

Surround (Left)

Surround (Right)

LEVEL

MODE

MOVIE

MUSIC

POWER

AUTO

OFF

ON / STANDBY

MIN

MAX

POWER

SAVE

MODE

POWER

LEVEL

Specifications

SA-VE345

For the U.S. model

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC

MODE

DISTORTION:

MOVIE

with 8 ohm loads, from 20 - 200 Hz; rated 120 watts per

channel minimum RMS power, with no more than 0.8%

total harmonic distortion from 250 milliwatts to rated

MUSIC

output.

SS-V345 (front and surround speakers)

Speaker system

Full range, magnetically

shielded

Speaker units

5.5 11 cm (

in.), cone type

Enclosure type

Bass reflex

Rated impedance

8 ohms

Power handling capacity

Maximum input power:

110 watts

Sensitivity level

85 dB (1 W, 1 m)

Frequency range

120 Hz - 20,000 Hz

Dimensions (w/h/d)

Approx. 89 152

mm (3

6 4

including front grille

Mass

Approx. 890 g (18 lb 5

oz) each

SS-CN345 (center speaker)

Speaker system

Full range, magnetically

shielded

Speaker units

5.5 11 cm (

in.), cone type

Enclosure type

Bass reflex

Rated impedance

8 ohms

Power handling capacity

Maximum input power:

110 watts

Sensitivity level

85 dB (1 W, 1 m)

Frequency range

90 Hz - 20,000 Hz

Dimensions (w/h/d)

Approx. 300 81

120 mm (11

in.), including front

grille

Mass

Approx. 1,200 g (35 lb 4

oz)

SA-WMS345 (subwoofer)

Speaker system

Active subwoofer,

magnetically shielded

Speaker unit

Woofer: 20 cm (8 in.),

cone type

Enclosure type

Advanced SAW type

Reproduction frequency range

26 Hz - 200 Hz

Amplifier section

Continuous RMS power output

120 W (8 ohms, 20 Hz -

20 kHz, 0.8% THD)

Inputs

LINE IN (input pin jack)

SPEAKER IN (input terminals)

Outputs

SPEAKER OUT (output terminals)

General

Power requirements

120 V AC, 60 Hz

Power consumptions

90 W

1 W (standby mode)

Dimensions (w/h/d)

Approx. 230 392 464

mm (9

in.), including front grille

Mass

Approx. 13.2 kg

(29 lb 2 oz)

Supplied accessories

Foot pads (20)

Audio connecting cord (1)

Speaker connecting cords, 10 m (32.8 ft) (2)

Speaker connecting cords, 3.5 m (11.5 ft) (3)

Design and specifications are subject to change without

notice.

115

in.),