Sony SRS-X88 Panduan Servis - Halaman 26

Jelajahi secara online atau unduh pdf Panduan Servis untuk Sistem stereo Sony SRS-X88. Sony SRS-X88 40 halaman. Personal audio system
Juga untuk Sony SRS-X88: Panduan Petunjuk Pengoperasian (28 halaman), Panduan Memulai (2 halaman), Panduan Petunjuk Pengoperasian (41 halaman), Panduan Memulai (2 halaman)

Halaman Cetak

SRS-X88

heat sink

(lower)

sleeve ferrite clamp

(FC1)

clamp filter

(ferrite core)

(FC3)

clamp filter

40 mm

(ferrite core)

(FC2)

clamp filter

(ferrite core)

(FC2)

clamp filter

(ferrite core)

(FC3)

Note 2: Bend the wires into an "S" shape, and

then arrange the clamp filter (ferrite core)

(FC3) sideways as shown in the figure.

The wires and MAIN board

are touching.

clamp filter

(ferrite core)

(FC2)

MAIN board

clamp

MAIN board

The wires are suspended

above the MAIN board.

CN100

MAIN board

CN100

MAIN board

Note 1: Arrange the wires along the edge

of the heat sink (lower).

MAIN board

CN508

Note 3: Secure the base

of the wires.

clamp

clamp filter

(ferrite core)

(FC3)

rear cabinet

Note 5: Confirm that the connector

Note 6: Confirm that there is a gap between

the clamp filter (ferrite core) (FC3)

and rear cabinet.

CN100

Note 4: Press the wires against

the MAIN board.

(CN007) is visible.