Sony SS-SHAKE99 Panduan Petunjuk Pengoperasian - Halaman 32
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Sony SS-SHAKE99. Sony SS-SHAKE99 48 halaman. Home audio system
Halaman Cetak
Enjoying the Party Chain
Perform the following procedure to
activate the Party Chain function.
1
Plug in the power cord and turn
on all the systems.
2
Adjust the volume on each
system.
3
Activate the Party Chain
function on the system which
you want it to be the Party Host.
Press FUNCTION repeatedly to select
the function (except AUDIO IN 1) you
want, then start playback.
Hold down MUSIC/PARTY CHAIN
on the unit for 2 seconds.
"PARTY CHAIN" appears in the
display panel. The system starts the
party as Party Host and other systems
will become Party Guest
automatically. All systems play the
same music as the Party Host.
Notes
• Depending on the total unit of systems you
have connected, Party Guest may take some
time to start playing the music.
• Changing the volume level and sound effect
on the Party Host will not affect the output on
the Party Guest.
• The Party Guest continues playing the music
source as Party Host even when you change
the function on Party Guest. However, you
can adjust the volume and change the sound
effect on Party Guest.
• (SHAKE-99/SHAKE-77/SHAKE-55 only)
When you use the microphone on Party Host,
the sound will not be output from Party Guest.
• The system which is not equipped with Party
Chain function cannot become a Party Host.
• When Party Chain function is activated while
one of the system in the connection is
performing USB transfer, the Party Chain
function will not be activated on that system
and the systems connected after it. Party
Chain function will only be activated after
that system completed or stopped the USB
transfer.
• For details on the operations of other systems,
refer to the operating instructions of the
systems.
GB
32
To select a new Party Host
When you make connection A, you can
select another system as the new Party
Host.
Repeat step 3 of "Enjoying the Party
Chain" on the system which you want it to
be a new Party Host.
The current Party Host will become Party
Guest automatically. All systems play the
same music as the new Party Host.
Notes
• You can only select another system as the new
Party Host after all the systems have
completed the Party Chain function.
• Repeat the step above if the selected system
does not change as a new Party Host after a
few seconds.
To deactivate the Party Chain
On the Party Host, hold down MUSIC/
PARTY CHAIN on the unit for 2 seconds.
Note
Repeat the step above if the system does not
deactivate the Party Chain after a few seconds.
Singing along
(SHAKE-99/SHAKE-77/SHAKE-55
only)
You can sing along with any audio source
that is playing on this system.
1
Turn MIC LEVEL to MIN to reduce
the microphone volume level.
2
Connect a microphone to the
MIC jack on the unit.
3
Start playing the music and
adjusting the volume.
4
Turn MIC LEVEL to adjust the
microphone volume.
If acoustic feedback (howling) occurs,
reduce the volume, move the
microphone away from the speakers,
or change the direction of the
microphone.
After you have finished, disconnect the
microphone.