Sony STR-DA2800ES Panduan Aktivasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Aktivasi untuk Sistem stereo Sony STR-DA2800ES. Sony STR-DA2800ES 7 halaman. Control4 automation
Juga untuk Sony STR-DA2800ES: Garansi Terbatas (1 halaman), Panduan Pengaturan Cepat (2 halaman), Panduan Pengaturan Cepat (2 halaman)

Halaman Cetak

(Optional) Connect the other devices you'd like

to attach to the receiver (e.g., Blu-ray player, DVD

player, etc.). See the Sony documentation for

details.

Control4 Activation

Instructions

Introduction

This guide gives you instructions to activate full

Control4 Automation on the Sony STR-DA5800ES

and STR-DA5800ES receivers. Following these

instructions will enable you to configure the receiver

as either a Primary or Secondary Controller.

• Use the Control4 On-Screen Navigator

• Control an unlimited number of devices with a

Control4 controller

• Configure and automate your project using

Composer Pro.

NOTES:

(1) IP cameras are not supported.

(2) Rhapsody is not supported if the Sony

STR receiver is the Primary Controller, but

is supported if the receiver is used as a

Secondary Controller.

(3) TuneIn radio is not supported on the Sony

STR receiver when it is configured as the

Primary Controller. If the Sony STR receiver is

configured as the Secondary Controller, then

TuneIn audio streamed from a Control4 HC

controller can be played in the receiver's main

zone.

(4) You cannot control a serial device, for

example, a Sony 777 disc changer or a serially-

controlled security panel directly with the

receiver; however, adding a Control4 I/O

Extender to the project will allow you to

control serial devices.

(5) Online media played through the Sony

STR receiver is only available in the receivers'

main zone. Likewise, any media streamed from

a Control4 HC controller to the Sony STR

receiver is also only available in the receiver's

main zone.

(6) Before you activate the Sony STR-

DA2800ES or DA5800ES receiver with full

Control4 Automation, ensure that you've met

all the requirements listed in the "Control4

System Requirements" section of this

document and in the Sony installation and

instruction documents.

Prerequisites

You will be using the Sony remote to activate the

receiver with full Control4 Automation and the

Control4 On-Screen Navigator.

TIPS:

(1) If left and right arrow icons appear on the

TV screen, use those arrow keys to navigate

through the Sony Easy Setup Wizard. Press

the Select button if no arrow displays on the

screen.

(2) After setup and when you're using the

Control4 On-Screen Navigator, you can use

the Control4 System Remote Control (e.g., SR-

250) or the Sony remote to navigate around

the Control4 system.

If this is a new Control4 system, ensure that a

my.control4.com account has been set up for the

customer.

Ensure that a Control4 Activation License for the

receiver has been added to the my.control4.com

account. When you purchase the receiver with

full Control4 Automation from Control4, a license

is added to the dealer's account. Simply apply

that license to the customer's account.

IMPORTANT!

Before installing the Control4

Activation License or using the receiver,

perform a Sony software update. To update

go to the following UI page: Home > Settings

> Network Update. The update may take up to

15 minutes--please be patient.

Primary Controller only: Go to my.control4.com

and obtain the registration code for the receiver.

Write down the 10-digit number; you'll need to

add it to the Sony Registration screen later (see

"Activate Primary Controller" below).