Sony ZS-RS60BT Petunjuk Pengoperasian
Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian untuk Sistem stereo Sony ZS-RS60BT. Sony ZS-RS60BT 2 halaman. Personal audio system
Juga untuk Sony ZS-RS60BT: Petunjuk Pengoperasian (2 halaman)
Halaman Cetak
Personal Audio System
Operating Instructions
©2014 Sony Corporation
ZS-RS60BT
The following FCC/IC statement applies
only to the version of this model
manufactured for sale in the USA and
Canada. Other versions may not comply
with FCC/IC technical regulations.
NOTE:
For United States customers. Not applicable in
Canada, including in the province of Quebec.
WARNING
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
To reduce the risk of fire or electric shock, do not
designed to provide reasonable protection against
expose this apparatus to rain or moisture.
harmful interference in a residential installation.
This equipment generates, uses and can radiate
To reduce the risk of fire, do not cover the ventilation
radio frequency energy and, if not installed and
opening of the appliance with newspapers,
used in accordance with the instructions, may cause
tablecloths, curtains, etc. Do not expose the
harmful interference to radio communications.
appliance to naked flame sources (for example,
However, there is no guarantee that interference will
lighted candles).
not occur in a particular installation. If this
To reduce the risk of fire or electric shock, do not
equipment does cause harmful interference to radio
expose this apparatus to dripping or splashing, and
or television reception, which can be determined by
do not place objects filled with liquids, such as
turning the equipment off and on, the user is
vases, on the apparatus.
encouraged to try to correct the interference by one
or more of the following measures:
As the main plug is used to disconnect the unit from
Reorient or relocate the receiving antenna.
the mains, connect the unit to an easily accessible
Increase the separation between the equipment
AC outlet. Should you notice an abnormality in the
and receiver.
unit, disconnect the main plug from the AC outlet
Connect the equipment into an outlet on a
immediately.
circuit different from that to which the receiver is
The unit is not disconnected from the AC power
connected.
source (mains) as long as it is connected to the wall
Consult the dealer or an experienced radio/TV
outlet, even if the unit itself has been turned off.
technician for help.
Do not install the appliance in a confined space,
This device complies with Part 15 of the FCC Rules.
such as a bookcase or built-in cabinet.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
Excessive sound pressure from earphones and
and (2) this device must accept any interference
headphones can cause hearing loss.
received, including interference that may cause
Do not expose the batteries (battery pack or
undesired operation.
batteries installed) to excessive heat such as
sunshine, fire or the like for a long time.
CAUTION
The nameplate is located on the bottom exterior.
You are cautioned that any changes or modifications
not expressly approved in this manual could void
Owner's Record
your authority to operate this equipment.
The model and serial numbers are located on the
This equipment must not be co-located or operated
bottom of the unit. Record these numbers in the
space provided below. Refer to them whenever you
in conjunction with any other antenna or transmitter.
call upon your Sony dealer regarding this product.
This equipment complies with FCC/IC radiation
exposure limits set forth for an uncontrolled
Model No. ZS-RS60BT
environment and meets the FCC radio frequency
Serial No.
(RF) Exposure Guidelines in Supplement C to OET65
and RSS-102 of the IC radio frequency (RF) Exposure
Important Safety Instructions
rules.
1) Read these instructions.
This equipment has very low levels of RF energy
2) Keep these instructions.
that it deemed to comply without maximum
3) Heed all warnings.
permissive exposure evaluation (MPE). But it is
4) Follow all instructions.
desirable that it should be installed and operated
5) Do not use this apparatus near water.
keeping the radiator at least 20 cm or more away
6) Clean only with dry cloth.
from person's body (excluding extremities: hands,
7) Do not block any ventilation openings. Install in
wrists, feet and ankles).
accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as
This symbol is intended to alert the
radiators, heat registers, stoves, or other
user to the presence of uninsulated
apparatus (including amplifiers) that produce
"dangerous voltage" within the
heat.
product's enclosure that may be of
9) Do not defeat the safety purpose of the
sufficient magnitude to constitute a
polarized or grounding-type plug. A polarized
risk of electric shock to persons.
plug has two blades with one wider than the
other. A grounding type plug has two blades
This symbol is intended to alert the
and a third grounding prong. The wide blade or
user to the presence of important
the third prong are provided for your safety. If
operating and maintenance
(servicing) instructions in the
the provided plug does not fit into your outlet,
literature accompanying the
consult an electrician for replacement of the
appliance.
obsolete outlet.
10) Protect the power cord from being walked on or
This graphical symbol is located on the bottom of
pinched particularly at plugs, convenience
the unit.
receptacles, and the point where they exit from
the apparatus.
Notice for the customers in Canada
11) Only use attachments/accessories specified by
This device complies with Industry Canada
the manufacturer.
licence-exempt RSS standard(s).
12) Use only with the cart, stand, tripod,
Operation is subject to the following two conditions:
bracket, or table specified by the
(1) this device may not cause interference, and (2)
manufacturer, or sold with the
this device must accept any interference, including
apparatus. When a cart is used, use
interference that may cause undesired operation of
caution when moving the cart/
the device.
apparatus combination to avoid injury
Under Industry Canada regulations, this radio
from tip-over.
transmitter may only operate using an antenna of a
13) Unplug this apparatus during lightning storms or
type and maximum (or lesser) gain approved for the
when unused for long periods of time.
transmitter by Industry Canada. To reduce potential
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
radio interference to other users, the antenna type
been damaged in any way, such as power-
and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more
supply cord or plug is damaged, liquid has been
than that necessary for successful communication.
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has
Personal Audio System is designed to be used
been dropped.
for playing back music sources on CDs or USB
devices, transferring music to USB devices,
listening to radio stations, and listening to music
on BLUETOOTH devices.
Power Sources
Connect the AC power cord
, or insert six LR14 (size C) batteries (not supplied) into the battery compartment
.
To a wall outlet
To AC IN
AC power cord (supplied)
Rear
Notes
Replace the batteries when the OPR/BATT indicator
dims, or when the unit becomes inoperable. Replace all of the batteries
with new ones. Before you replace the batteries, be sure to remove any CD and disconnect any USB devices or optional
components from the unit.
To use the unit on batteries, disconnect the AC power cord from the unit and the wall outlet.
In standby mode with the AC power cord connected, "STANDBY" appears on the display.
Basic Operations
4-559-901-11(2)
Printed in China
*
and VOL +
have a tactile dot.
WMA files encoded in WMA DRM, WMA Lossless and
Before using the unit
This unit cannot play audio files on a disc in the following
To turn the power on or off
Press POWER
. You can also turn on the power of
this unit using the direct power-on function (below).
In this manual, operations are mainly explained
using the direct power-on function.
Folder names can be displayed with up to 32 characters,
To use the direct power-on function
File names can be displayed with up to 32 characters,
Press CD
, USB
, BLUETOOTH
, FM/AM
,
AUDIO IN
or FAVORITE RADIO STATIONS (1-3)
Characters and symbols that cannot be displayed by the
while the unit is turned off. The power turns on with
the relevant function selected.
This unit conforms to version 1.0, 1.1, 2.2, 2.3 and 2.4 of the
To adjust the volume
Press VOL + or
.
To listen through headphones
Connect headphones to the (headphones) jack
.
To reinforce the bass
Press MEGA BASS
.
"MEGA BASS" lights up on the display.
To return to normal sound, press the button again.
Listening to music on a USB device
Playing a music disc
You can listen to audio files stored on a USB device
(a digital music player or USB storage media).
1
Press CD
to turn on the CD function.
Audio files in MP3, WMA and AAC formats* can be
2
played on this unit.
Press PUSH OPEN/CLOSE
, place a disc in
* Files with copyright protection (Digital Rights
the CD compartment and then close the
compartment cover.
1
2
Label side up
The disc is loaded and the disc information
appears on the display.
3
Audio CD
Total number of tracks
Total playing time
MP3/WMA disc
Other operations
To
Total number of folders*
Pause playback
* If MP3/WMA files are present only in the root directory
("ROOT" folder), "1FLDR" appears on the display.
Stop playback
3
Press
to start playback.
Track number or MP3/WMA file
number
Select a folder
Select a file
Playing time
When you play an MP3/WMA disc, the folder
name*
1
and song title are displayed before the
Find a point in a
playing time*
2
appears.
file
*
1
If MP3/WMA files are present only in the root directory,
"ROOT" appears on the display.
*
2
If the playing time is longer than 100 minutes, "--:--"
appears on the display.
Other operations
To
Do this
* When playing a VBR MP3/WMA/AAC file, playback may
Press . To return to
Pause playback
playback, press the button
Note
again.
When removing a USB device, hold down
Stop playback
Press . When you press
DEV" appears, and then turn off the unit or switch to other
after playback is stopped,
functions beforehand. Removing the USB device without
performing these steps may corrupt the data on the USB
playback starts from the point
device or damage the device itself.
where you stopped playback
(Resume Play).
Example of folder structure and playing order
Select a folder
+ or .
The playing order of the folders and files is as
Press
on an MP3/WMA
follows. However, the playing order may differ from
disc
the original order on the USB device, depending on
the recording method used.
Press or . You can
Select a track/
file
skip tracks/files one by one.
USB device
Find a point in a
Hold down or
track/file
during playback, and release the
button at the desired point.
When locating a point while
paused, press to start
playback after the desired point
is found.
Tip
To cancel the Resume Play, press
while the CD is
stopped.
Note
Resume Play is cancelled in the following cases:
When you open the CD compartment.
When you turn off the power.
Example of folder structure and playing order
The playing order of the folders and files is as
follows. However, the playing order may differ from
Notes on the USB device
the original order on the disc, depending on the
It may take a long time before playback starts when:
recording method used.
Folder
Do not save non-MP3/WMA/AAC files or unnecessary
MP3/WMA file
During playback, audio files other than MP3, WMA and
The audio formats supported by this unit are as follows:
MP3 PRO format is not supported.
WMA files encoded in WMA DRM, WMA Lossless and
AAC files encoded in copyright-protected AAC format
This unit supports the AAC-LC (AAC Low Complexity)
Notes on MP3/WMA discs
This unit cannot play audio files on a USB device in the
When a disc is loaded, the unit reads all the files on that
disc. During this time, "READING" is flashing. If there are
many folders or non-MP3/WMA files on the disc, it may
take a long time for play to begin or for the next MP3/
WMA file to start to play.
We recommend that non-MP3/WMA files or unnecessary
folders are excluded when creating MP3/WMA discs.
During playback, audio files other than MP3 and WMA
files are skipped even if those files are included in a folder.
The audio formats supported by this unit are as follows:
MP3: File extension ".mp3"
WMA: File extension ".wma"
Compatibility with all encoding/writing software is not
Note that even if the file name has the correct file
extension but the actual file was created in a different
audio format, this unit may produce noise or may
malfunction.
MP3 PRO format is not supported.
Folder names can be displayed with up to 32 characters,
including quotation marks.
File names can be displayed with up to 32 characters,
including quotation marks and file extensions.
Characters and symbols that cannot be displayed by the
unit will appear as "_".
This unit conforms to version 1.0, 1.1, 2.2, 2.3 and 2.4 of the
ID3 tag format for MP3 files, the WMA tag format defined
by the ASF specification (Advanced Systems Format) for
WMA files, and the AAC tag format for AAC files.
When a file has the ID3, WMA or AAC tag information, the
song title, artist name, and album name will be displayed.
If a file does not have the tag information, the unit
displays as follows:
File name instead of the song title.
"NO ARTIST" message instead of the artist name.
"NO ALBUM" message instead of the album name.
ID3/AAC tag information can be displayed up to 64
characters, and WMA tag information can be displayed up
to 32 characters.
Transferring music from a disc to a
USB device
WMA PRO formats cannot be played back.
You can transfer a whole disc (CD SYNC transfer) or
the currently playing track or file (REC1 transfer) to a
cases:
USB device (digital music player or USB storage
When the total number of audio files exceeds 999.
media, etc.).
When the total number of folders on a single disc
When transferring from a CD, the tracks are
exceeds 256 (including the "ROOT" folder).
transferred as MP3 files with a sampling frequency
When the directory level (folder depths) exceeds 8
of 44.1 kHz at 128 kbps (CBR). When transferring
(including the "ROOT" folder).
from an MP3/WMA disc, MP3/WMA files are
including quotation marks.
transferred with the same bit rate as the original
MP3/WMA files.
including quotation marks and file extensions.
1
Connect the USB device to the (USB) port
unit will appear as "_".
2
Press CD
to turn on the CD function.
3
Place the disc you want to transfer in the CD
ID3 tag format for MP3 files and the WMA tag format
compartment.
defined by the ASF specification (Advanced Systems
Format) for WMA files. When a file has the ID3 or WMA tag
CD SYNC transfer
information, the song title, artist name, and album name
will be displayed. If a file does not have the tag
To transfer a whole disc
information, the unit displays as follows:
Proceed to step 4.
File name instead of the song title.
"NO ARTIST" message instead of the artist name.
To transfer MP3/WMA files in a specific
"NO ALBUM" message instead of the album name.
folder
ID3 tag information can be displayed up to 64 characters,
+ or
Press
repeatedly to select the folder
and WMA tag information can be displayed up to 32
you want.
characters.
To transfer only your favorite tracks/files
Perform step 1 to 5 of "Creating your own
program (Program Play)" on the back page.
REC1 transfer
To transfer a single track/file
Select and start playback of the track/file you
want to transfer.
4
Press REC
.
Management) cannot be played on this unit.
"REC" flashes on the display and the unit starts
Connect the USB device to the (USB) port
.
calculating the amount of free space on the USB
Press USB
to turn on the USB function.
device.
The volume label scrolls once, then the total
number of folders appears on the display.
If "LOW ***M" appears on the display, there is not
sufficient space on the device. To cancel the
Total number of folders
transferring, press
. To continue transferring
anyway, proceed to step 5.
Press
to start playback.
5
Press ENTER
.
The folder name and song title are displayed, and
then the file number and playing time appear.
Transferring starts.
When transferring is completed, playback stops
File number
automatically (CD SYNC transfer) or proceeds to
the next track/file (REC1 transfer).
To stop transferring
Press .
An MP3/WMA file is created up to the point the
Playing time*
transferring was stopped.
* If the playing time is longer than 100 minutes, "--:--"
Folder and file generation rules
appears on the display.
When first transferring to a USB device, a "MUSIC"
folder and its sub folder "SONY" are created directly
below the "ROOT" folder.
Do this
Folders and files are generated within the "CD"
folder under the "SONY" folder based on the
Press . To return to
following rules.
playback, press the button
again*.
CD SYNC transfer
Press . When you press
Transferring
after playback is stopped,
Folder name
source
playback starts from the point
MP3/WMA
Same as the transferring source*
where you stopped playback
(Resume Play).
CD-DA
"ALBUM001"*
3
+ or .
Press
REC1 transfer
Press or . You can
Transferring
skip files one by one.
Folder name
source
To skip files continuously, hold
down or and
release the button at the desired
MP3/WMA
"REC1"*
5
file.
Hold down or
CD-DA
during playback, and release the
*
1
In Program Play mode, the folder name is "FLDRxxx," and
button at the desired point.
the file name depends on the transferring source.
When locating a point while
*
2
Up to 32 characters (including a file extension for a file
paused, press to start
name) can be assigned.
playback after the desired point
*
3
Folder names are assigned in sequential order up to a
is found.
maximum of 256 (including the "ROOT" and "MUSIC"
folders).
*
4
File names are assigned in sequential order.
restart from a different point.
*
5
A new file is transferred to the "REC1" folder each time
single track transfer is performed.
until "NO
To erase audio files or folders from the USB
device
1
Press
or
repeatedly to select an
audio file, or press
+ or –
select a folder.
2
Press ERASE
.
"ERASE?" appears on the display.
3
Press ENTER
.
"TRACK ERASE?" or "FOLDER ERASE?" appears on
Folder
the display.
MP3/WMA/AAC file
4
Press ENTER
.
The selected audio file or folder is erased, and
"COMPLETE" appears on the display.
Notes
If you start transferring in shuffle play or repeat play
mode, the selected play mode is automatically changed
to normal play.
Do not remove the USB device during transferring or erase
operations. Doing so may corrupt the data on the device
or damage the device itself.
While transferring, no sound is output and "HI-SPEED"
appears on the display.
CD-TEXT information is not transferred in the created MP3
files.
Transferring stops automatically if:
the USB device runs out of space during transferring.
the number of audio files and folders on the USB device
reaches the limit that the unit can recognize.
Non-MP3/WMA/AAC format files or sub folders in the
folder are not erased.
the folder structure is complex.
Radio sound and sound from an optional component
the USB device is close to capacity.
cannot be transferred to a USB device.
folders to a USB device that contains MP3/WMA/AAC files.
Note on copyright-protected content
The transferred music is limited to private use only. Use of
AAC files are skipped even if those files are included in a
the music beyond this limit requires permission from the
folder.
copyright holders.
MP3: file extension ".mp3"
WMA: file extension ".wma"
AAC: file extension ".m4a," ".3gp" and ".mp4"
Note that even if the file name has the correct file
extension but the actual file was created in a different
audio format, this unit may produce noise or may
malfunction.
WMA PRO formats cannot be played back.
cannot be played back.
profile.
following cases:
When the total number of audio files in a single folder
exceeds 999.
When the total number of audio files on a single USB
device exceeds 5,000.
When the total number of folders on a single USB
device exceeds 256 (including the "ROOT" folder).
When the directory level (folder depths) exceeds 8
(including the "ROOT" folder).
These numbers may vary depending on the file and folder
structure.
guaranteed. If audio files on the USB device were
originally encoded with incompatible software, those files
may produce noise or interrupted sound, or may not be
played back at all.
4
Touch the unit with the smartphone.
Listening to music wirelessly on a
Keep touching the smartphone to the N mark
on the unit until the smartphone responds.
BLUETOOTH device
Note
If your smartphone screen is locked, the smartphone will
Using the BLUETOOTH connection, you can listen to
not function. Release the lock, then touch the
music from wirelessly connected BLUETOOTH
smartphone to the N mark again.
devices such as mobile phones, smartphones, music
players, etc.
Follow the on-screen instructions to establish the
connection.
Pairing this unit with a
When the BLUETOOTH connection is established,
BLUETOOTH device
"BT AUDIO" appears on the display.
BLUETOOTH devices must be "paired" with each
other beforehand. Once BLUETOOTH devices are
paired, there is no need for pairing again, unless the
pairing information is cleared.
Choose the pairing method below depending on
Tips
your device.
If it is difficult to establish the connection, try the
Pairing with an NFC-incompatible BLUETOOTH
device:
see
Pattern A
Pairing with an NFC-compatible smartphone:
Touch the unit with the smartphone again to
.
see
Pattern B
If you have multiple NFC-compatible devices, just
Pattern A
Pairing with an NFC-incompatible
BLUETOOTH device
Keep the BLUETOOTH device and the unit within 1
meter (39
3
/
in) of each other for this operation.
8
Listening to music
1
Press BLUETOOTH
to turn on the
BLUETOOTH function.
Check the following before operating the unit.
If no devices have been paired, such as when you
The BLUETOOTH function of the BLUETOOTH
press BLUETOOTH
for the first time after you
device is turned on.
purchase the unit, the unit automatically enters
Pairing has been completed. (See "Pairing this unit
pairing mode, and the BLUETOOTH indicator ( )
with a BLUETOOTH device".)
and "PAIRING" flash on the display.
1
Make the BLUETOOTH connection between
the unit and the device.
For an NFC-incompatible BLUETOOTH
device
When pairing with two or more
Press BLUETOOTH
BLUETOOTH devices
function.
Hold down BLUETOOTH (–PAIRING)
until two
The last connected device will be connected
beeps are heard.
automatically.
2
Turn on the BLUETOOTH function of the
For an NFC-compatible smartphone
BLUETOOTH device.
Touch the smartphone to the N-Mark
3
unit.
Perform the pairing procedure on the
BLUETOOTH device to detect the unit.
2
Start playback of an audio source such as
4
Select "ZS-RS60BT" shown on the display of
music, videos, games, etc., on the device.
the BLUETOOTH device.
Refer to the instruction manual of your device for
If "ZS-RS60BT" does not appear on the device's
details on playback operations.
display, repeat from step 2.
Tip
5
If Passcode* input is required on the display of
To adjust the volume, set the volume of the BLUETOOTH
the BLUETOOTH device, input "0000."
device or the smartphone to the moderate level, and then
press VOL
The BLUETOOTH connection is established.
"BT AUDIO" appears on the display.
To terminate a BLUETOOTH connection
* "Passcode" may be referred to as "Passkey," "PIN code,"
Do any of following.
"PIN number," or "Password."
Turn off the BLUETOOTH function of the
BLUETOOTH device. For details, refer to the
operating instructions supplied with the device.
Turn off the BLUETOOTH device.
Change the function of the unit.
Tip
Turn off the unit.
You can pair up to 8 BLUETOOTH devices. If the 9th
Touch the unit with the smartphone again to
BLUETOOTH device is paired, the oldest paired device will be
disconnect (NFC-compatible smartphones only).
deleted.
To clear the paired device information
Notes
Pairing mode of the unit is cancelled after about
1
Hold down ERASE
5 minutes, and the BLUETOOTH indicator (
) flashes. If
on the display.
pairing mode is cancelled while performing this
procedure, start over from step 1.
2
Press ENTER
The passcode of the unit is fixed as "0000." The unit
When the paired device information is cleared,
cannot be paired with a BLUETOOTH device whose
File name
"COMPLETE" appears on the display. To cancel
Passcode is not "0000."
the reset operation, press .
1, 2
Pattern B
"TRACK001"*
4
Pairing with an NFC-compatible
smartphone
By just touching the unit with an NFC-compatible
File name
smartphone, the unit is turned on and switched to
the BLUETOOTH function automatically and then
Same as the
paired and connected to the smartphone.
transferring
source*
2
Compatible smartphones
Smartphones with the NFC function built-in
"TRACK001"*
4
(OS: Android™ 2.3.3 or later, excluding Android 3.x)
What is "NFC"?
NFC (Near Field Communication) is a
technology enabling short-range wireless
communication between various devices,
such as mobile phones and IC tags. Thanks to
the NFC function, data communication can be
achieved easily just by touching the relevant
symbol or designated location on NFC
compatible devices.
1
Turn on the NFC function of the smartphone.
For details, refer to the operating instructions
supplied with the smartphone.
repeatedly to
If your smartphone OS is Android 2.3.3 or
later, but earlier than Android 4.1
Proceed to step 2.
If your smartphone OS is Android 4.1 or
later
Proceed to step 4.
2
Download and install the app "NFC Easy
Connect" on the smartphone.
"NFC Easy Connect" is an original app by Sony for
Android phones, and is available at the Google
Play™ Store.
Search for "NFC Easy Connect" or scan the
following two-dimensional code to download
and install the free app. Communication fees are
required to download the app.
The App may not be available in some countries
and/or regions.
Tip
For some smartphones, One-touch connection may be
available without downloading the app "NFC Easy
Connect." In that case, the operation and specifications
may be different from the description here. For details,
refer to the operating instructions supplied with the
smartphone.
For the two-dimensional code:
Use a two-dimensional code reader app.
3
Start the app "NFC Easy Connect" on the
smartphone.
Make sure that the application screen is
displayed.
Listening to the radio
1
Press FM/AM
repeatedly to turn on the
radio function and select the band "FM" or
"AM."
2
Hold down TUNE + or
until the frequency
Smartphone responds
digits begin to change on the display.
(unit recognized)
The unit automatically scans the radio
frequencies and stops when it finds a clear
station.
If you cannot tune to a station using automatic
tuning mode, press TUNE + or
change the frequency step by step.
When an FM stereo broadcast is received, "ST"
lights up on the display.
Tips
The unit of frequency of tuned stations is MHz for the FM
band and kHz for the AM band.
If the stereo FM reception is noisy, press FM MODE
repeatedly until "MONO" appears on the display. You will
lose the stereo effect, but the reception will be improved.
To improve radio reception
following.
Activate the app "NFC Easy Connect" and move the
Reorient the antenna to
smartphone slightly across the N mark
on the
improve FM reception.
unit.
If the smartphone is in a case, remove it.
disconnect.
Reorient the unit
itself to improve AM
touch the smartphone to a different device to switch
the connection to that device. For example, when your
reception.
smartphone is connected with NFC-compatible
headphones, just touch the smartphone to the unit to
change the BLUETOOTH connection to the unit
(One-touch connection switching).
Presetting stations to FAVORITE
RADIO STATIONS
You can preset up to three favorite stations to
FAVORITE RADIO STATIONS (1-3) buttons. Assign one
FM or AM program for each button.
1
Press FM/AM
repeatedly to turn on the
radio function and select the band "FM" or
"AM."
2
Tune to the station you want to preset.
3
Press and hold the desired FAVORITE RADIO
STATIONS (–SET) (1-3) button
a beep.
to turn on the BLUETOOTH
The tuned station is preset to the selected button
of FAVORITE RADIO STATIONS (1-3) and the same
number as that of the button will light up on the
display.
(Example: Presetting FM 87.5 MHz to number )
on the
To change the preset station
Repeat steps 1 to 3.
The preset station on the button will be replaced by
or +
on the unit.
the new one.
Listening to preset stations with
FAVORITE RADIO STATIONS
Press the desired FAVORITE RADIO STATIONS (1-3)
button
.
Note
To prevent the preset from being changed by mistake, do
not hold down the button. If doing so, the preset on the
button will be replaced by the currently tuned station.
until "BT RESET" appears
.
repeatedly to
until you hear