Cisco ASA 5555-X Manual Perangkat Lunak - Halaman 5

Jelajahi secara online atau unduh pdf Manual Perangkat Lunak untuk Perangkat Keras Jaringan Cisco ASA 5555-X. Cisco ASA 5555-X 37 halaman. Threat defense reimage guide
Juga untuk Cisco ASA 5555-X: Panduan Petunjuk Instalasi (13 halaman), Panduan Memulai Cepat (13 halaman), Panduan Memulai Cepat (15 halaman)

Halaman Cetak

Cisco ASA and Firepower Threat Defense Reimage Guide

ASA Model

ISA 3000

Upgrade the ROMMON Image (ASA 5506-X, 5508-X, and 5516-X)

Follow these steps to upgrade the ROMMON image for the ASA 5506-X series, ASA 5508-X, and ASA

5516-X. The ROMMON version on your system must be 1.1.8 or greater.

Note

You cannot upgrade the ROMMON image after you reimage to Firepower Threat Defense.

Before you begin

You can only upgrade to a new version; you cannot downgrade. To see your current version, enter the show

module command and look at the Fw Version in the output for Mod 1 in the MAC Address Range table:

ciscoasa# show module

[...]

Mod

---- --------------------------------- ------------ ------------ ---------------

1 7426.aceb.ccea to 7426.aceb.ccf2

sfr 7426.aceb.cce9 to 7426.aceb.cce9

Procedure

Step 1

Obtain the new ROMMON image from Cisco.com, and put it on a server to copy to the ASA. This procedure

shows a TFTP copy.

Download the image from:

https://software.cisco.com/download/type.html?mdfid=286283326&flowid=77251

Step 2

Copy the ROMMON image to the ASA flash memory:

copy tftp://server_ip/asa5500-firmware-xxxx.SPA disk0:asa5500-firmware-xxxx.SPA

Download Location

http://www.cisco.com/go/isa3000-software

ASA Software

Choose your model > Adaptive Security Appliance

(ASA) Software > version.

ASDM Software

Choose your model > Adaptive Security Appliance

(ASA) Device Manager > version.

REST API Software

Choose your model > Adaptive Security Appliance

REST API Plugin > version.

MAC Address Range

Upgrade the ROMMON Image (ASA 5506-X, 5508-X, and 5516-X)

Packages

The ASA software file has a filename like

asa962-lfbff-k8.SPA.

The ASDM software file has a filename like

asdm-762.bin.

The API software file has a filename like

asa-restapi-132-lfbff-k8.SPA. To install the

REST API, see the

Hw Version

Fw Version

0.3

1.1.5

N/A

Cisco ASA and Firepower Threat Defense Reimage Guide

API quick start

guide.

Sw Version

9.4(1)