Cisco ASA 5580 Panduan Memulai Cepat - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan Cisco ASA 5580. Cisco ASA 5580 40 halaman. Asa 5500 series adaptive security appliance
Juga untuk Cisco ASA 5580: Panduan Memulai Cepat (13 halaman)

Halaman Cetak
Cisco ASA 5580 Panduan Memulai Cepat
Chapter 2
Installing the ASA 5510, ASA 5520, or ASA 5540

Powering On the ASA

Step 1
Step 2
Step 3
Step 4
Step 5
Connecting Interface Cables and Verifying Interface
Connectivity
Note
Step 1
Step 2
78-19753-01
Attach the power cable to the rear panel of the ASA.
Connect the power cable to an electrical outlet.
Power on the ASA.
Check the Power LED on the front of the ASA; if it is solid green, the device is
powered on.
Check the Status LED on the front of the adaptive security appliance; once it is
solid green, the system has passed power-up diagnostics.
The illustration in this section shows the ASA 5540. The ASA 5510 and ASA
5520 chassis are identical, containing the same back panel features and indicators.
Connect a management PC to the Management 0/0 interface for use with the
Adaptive Security Device Manager (ASDM).You can connect it directly with an
Ethernet cable, or connect the PC and the ASA to the same management network.
Make sure the PC is configured to obtain an IP address using DHCP.
If you want to use the CLI, connect your PC to the console port and see
Note
the CLI configuration guide more information.
Connect your networks to the appropriate ports.
Cisco ASA 5580 Series Quick Start Guide
Powering On the ASA
2-3