Cisco ASA 5580 Panduan Memulai Cepat - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan Cisco ASA 5580. Cisco ASA 5580 13 halaman. Asa 5500 series adaptive security appliance
Juga untuk Cisco ASA 5580: Panduan Memulai Cepat (40 halaman)
Halaman Cetak
3
Maximizing Throughput
Refer to the following illustration when planning your network for maximum throughput.
Slot 9 (Reserved)
PCI-E x4
Slots 7, 8
(I/O Bridge 2)
Slots 5, 7, 8 (High Capacity Bus,
PCI Express x8 non-hot-plug)
• You should use the high-capacity bus slots (5, 7, 8) for 10-Gigabit Ethernet adapters; other
adapters can be placed in any slot.
• Distribute traffic on the I/O bridges using the following best practices:
Have equal amounts of traffic on both I/O bridges.
–
Keep traffic flow within the same I/O bridge.
–
For example, the ideal traffic distribution would be:
a. Half the traffic stays on slots 7 and 8.
b. The other half of the traffic stays on slots 3 through 6.
Steps a and b achieve both best practices above. If you cannot achieve both practices, then you
should prefer the first best practice: have equal amounts of traffic on both I/O bridges.
See the Hardware Installation Guide for more information about maximizing throughput on the
ASA 5580.
4
PCI-E x8
PCI-E x4 PCI-E x8
9
8
7
6
Slots 1, 2 (Reserved)
PCI-E x4
PCI-X 100 MHz
5
4
3
2
Slots 3, 4, 6 (Normal Capacity Bus,
PCI Express x4 non-hot-plug)
1
Slots 3, 4, 5, 6,
Management Ifcs
(I/O Bridge 1)