Cisco ASR 9000 Series Panduan Konfigurasi

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Perangkat Keras Jaringan Cisco ASR 9000 Series. Cisco ASR 9000 Series 46 halaman. Line card
Juga untuk Cisco ASR 9000 Series: Mengkonfigurasi Pengaturan Jaringan (26 halaman), Panduan Konfigurasi (50 halaman), Manual (24 halaman), Mengkonfigurasi (46 halaman), Manual (44 halaman), Panduan Referensi Cepat (7 halaman)

Configuring Clear Channel T3/E3 and

Channelized T3 and T1/E1 Controllers on the

Cisco ASR 9000 Series Router

This module describes the configuration of clear channel T3/E3 controllers and channelized T3 and

T1/E1 controllers on the Cisco ASR 9000 Series Aggregation Services Routers.

You must configure the T3/E3 controller before you can configure an associated serial interface.

Feature History for Configuring T3/E3 Controller Interfaces

Release

Release 3.9.0

Release 4.0.0

Release 4.0.1

Release 4.1.0

OL-32684-01

Modification

This feature was introduced on the Cisco ASR 9000 Series Router for the

Cisco 2-Port Channelized OC-12c/DS0 SPA.

Support for the following features was added on the Cisco 2-Port

Channelized OC-12c/DS0 SPA:

NxDS0 channelization

•

Link Noise Monitoring

•

Support for clear channel T3 controllers on the 1-Port Channelized

OC-48/STM-16 SPA was introduced.

Support for the following SPAs was added:

•

Cisco 1-Port Channelized OC-3/STM-1 SPA

•

Cisco 2-Port and 4-Port Clear Channel T3/E3 SPA

Support for the following SPAs was added:

•

–

Support for a Link Noise Monitoring enhancement was added on the

•

Cisco 2-Port Channelized OC-12c/DS0 SPA to set thresholds for noise

errors on T1/E1 links that are used to signal the Noise Attribute to PPP

for removal of an MLPPP bundle link.

Cisco ASR 9000 Aggregation Services Router Interface and Hardware Component Configuration Guide

Cisco 4-Port Channelized T3/DS0 SPA

Cisco 8-Port Channelized T1/E1 SPA

445