Cisco ASR 901S Series Mempersiapkan Pemasangan - Halaman 6
Jelajahi secara online atau unduh pdf Mempersiapkan Pemasangan untuk Perangkat Keras Jaringan Cisco ASR 901S Series. Cisco ASR 901S Series 9 halaman.
Juga untuk Cisco ASR 901S Series: Pemecahan masalah (4 halaman)
Halaman Cetak
Unpacking the Router
• Check the required tools list to make sure the necessary tools and test equipment are available (see
• Perform the installation.
Unpacking the Router
Procedure
Step 1
Open the shipping container and carefully remove the contents.
Tip
Step 2
Return all packing material to the shipping container, and save it.
Note
Step 3
Ensure that all items listed in
is damaged or missing, notify your authorized Cisco sales representative.
Router Package Contents
Your router kit contains the items listed in the following table:
Qty.
1
1
1
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
6
Customer-Supplied Materials and
When you unpack the router, do not remove the foam blocks attached to antennas and antenna
connectors. The foam protects the antennas and connectors during installation.
Do not discard the packaging materials used in shipping your Cisco ASR 901S Series Aggregation
Services Router. You will need the packaging materials in the future if you move or ship the router.
Router Package Contents, on page 6
Item
Router
Accessories or Install Kit
Optional Items (Ordered
Separately)
Pole mount kit
Tools).
are included in the shipment. If any item
Description
Cisco ASR 901S Series Aggregation Services Router
For details about the chassis models, see
Options.
• Special screw driver (part number: 51-6796-01)
• Dust cap for antenna (part number: 29-8328-01)
• Pole clamp bracket
• Two pole clamp gussets
• Required hardware
For details, see
Pole Mount
Preparing to Install the Router
Components and
Kit.
OL-29732-02