Cisco ASR 9922 Manual - Halaman 4
Jelajahi secara online atau unduh pdf Manual untuk Perangkat Keras Jaringan Cisco ASR 9922. Cisco ASR 9922 44 halaman. Replacing cisco asr 9000 series router components
- 1. Field Replaceable Units
- 2. Online Insertion and Removal
- 3. Powering off the Router
- 4. Replacing the Chassis Air Filter
- 5. Required Tools and Equipment
- 6. Removing a Fan Tray
- 7. Installing a Fan Tray
- 8. Disconnecting AC Power
- 9. Reconnecting AC Power
- 10. Disconnecting DC Power
- 11. Reconnecting DC Power
Replacing the Chassis Air Filter
Procedure
Step 1
Set the power switch on each power tray to the off (0) position.
Step 2
Power off all circuit breakers for the source power lines connected to the power trays.
Step 3
Verify that the Pwr OK indicator on each power module is off.
Step 4
Verify that the OK indicator on the fan tray is off.
Replacing the Chassis Air Filter
The Cisco ASR 9000 Series Routers are equipped with user-replaceable air filters that help prevent dust from
being drawn into the router. One time per month (or more often in dusty environments), examine the air filters
for damage and cleanliness.
Note
In the Cisco ASR 9006 Router, Cisco ASR 9010 Router, Cisco ASR 9904 Router, Cisco ASR 9906 Router,
and Cisco ASR 9910 Router, the chassis air filter is not serviceable. We recommend that you replace the filter
at regular maintenance intervals. The interval may vary between 3 and 12 months depending on the environment.
Note
In the Cisco ASR 9922 Router and Cisco ASR 9912 Router, the three air filters (left, center, and right) contain
foam media which filters the air going into the chassis. The three air filters can be removed from the chassis
so that the foam media (Cisco PIDs 9922-CEN-FLTRMED= and 9922-LR-FLTRMED=) can be replaced on
a regular maintenance interval. The interval may vary between 3 and 12 months depending on the environment.
Caution
Damage to the air filter can restrict the airflow, cause overheating in the router, and degrade electromagnetic
interference (EMI) compliance. Be careful when cleaning and replacing the filter.
This table describes the air filter locations for the Cisco ASR 9000 Series Routers.
Table 1: Air Filter Locations for the Cisco ASR 9000 Series Routers
Router
Cisco ASR 9010 Router
Cisco ASR 9006 Router
Cisco ASR 9904 Router
Cisco ASR 9910 Router
Cisco ASR 9906 Router
Replacing Cisco ASR 9000 Series Router Components
4
Air Filter Location
Located underneath the fan trays.
Located along the right side of the chassis and is accessible from the rear.
Single air filter located along the right side of the chassis and is accessible from
the rear.
Located underneath the card cage.
Located underneath the card cage.
Replacing Cisco ASR 9000 Series Router Components