Cisco C7200-I - Input/Output Controller - Control Processor Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat Keras Jaringan Cisco C7200-I - Input/Output Controller - Control Processor. Cisco C7200-I - Input/Output Controller - Control Processor 16 halaman. Input/output controllers
Halaman Cetak
interface gigabitethernet
interface gigabitethernet
To configure a Gigabit Ethernet interface and enter interface configuration mode, use the
interface gigabitethernet slot/port global configuration command.
To configure a Gigabit Ethernet interface and enter interface configuration mode on a Cisco 7200 VXR
router used as a router-shelf in an AS5800 Universal Access Server, use the
interface gigabitethernet router-shelf/slot/port global configuration command.
Syntax Description
shelf
slot
port
Defaults
No default behavior or values.
Command Modes
Configuration
Command History
Release
11.1 CC
12.1(3a)E
12.1(5)T
12.2(14)S
Usage Guidelines
Many features are enabled on a per-interface basis. The interface gigabitethernet global configuration
command modifies the operation of the Gigabit Ethernet interface on the Cisco 7200-I/O-GE+E.
Examples
Router(config)# interface gigabitethernet 0/0
Router(config-if)#
Related Commands
Command
show interface
gigabitethernet slot/port
12.1(5)T and 12.2(14) S
8
interface gigabitethernet slot/port
interface gigabitethernet router-shelf/slot/port
Router shelf in a Cisco AS5800 Universal Access Server.
Slot number of the interface.
Port number on the interface.
Modification
This command was introduced.
Support for the Cisco 7200-I/O-GE+E controller was introduced.
This command was integrated into Cisco IOS Release 12.1(5)T.
This command was integrated into Cisco IOS Release 12.2(14)S.
Cisco 7200-I/O-GE+E and Cisco 7200-I/O-2FE/E Input/Output Controllers
Description
Displays information about the Gigabit Ethernet interface.