Cisco C85GE-1X-16K Panduan Instalasi - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Perangkat Keras Jaringan Cisco C85GE-1X-16K. Cisco C85GE-1X-16K 19 halaman. Installing and grounding the chassis
Halaman CetakReplacing Components
Securing an ESD Strap
WARNING: Always connect the ESD wrist strap to
the ESD strap connection at the top left side of the
chassis before removing any component.
Replacing a Power Supply
AC Power Supply
DC Power Supply
Captive
On/off
Captive
installation
switch
installation
screw
LED
screw
AC power
inlet
0
100 Base Fx
FAST ETHERNET MODULE
1
2
3
4
WARNING: Always turn off the power supply unit
before removing it. While holding the AC or DC power
supply handle with one hand, place your other hand
underneath to support the bottom of the supply.
Installing an Interface Module
or Carrier Module
On/off
switch
Terminal
LED
block
Installing a Fan
0
100 Base Fx
FAST ETHERNET MODULE
1
2
3
4
3
Insert module
between
module guides
4
Captive
screws
100 Base Fx
FAST ETHERNET MODULE
0
1
2
3
4
Fan assembly
Installing a Port Adapter
Port adapter slot 1
Port adapter slot 0
Port
adapter
Tighten the captive
installation screw
SUPERVISOR ENGINE
SUPERVISOR ENGINE
Insert module
between
module guides
Carrier
module
3
4