Argo X5 Buku Petunjuk - Halaman 10
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Mesin Penjilid Argo X5. Argo X5 17 halaman. 2-in-1
Halaman Cetak
wire comB Binding
1.
Insert a wire onto the wire holder, placed on the front of the machine.
2.
Load punched sheets directly onto the wire loops
3.
Set the wire closure control for the desired wire's size.
4.
Remove the binded document from the wire holder. Put it down in the wire closure
control (opening faced inside) and let the wire loops rest fully into the wire closing
channel.
5.
Pull down the wire closing handle completely to close the wire. Return it to the origi-
nal position. Remove the binded document.
6.
Turn the micro adjustment knob to refine the wire closing result. counter clockwise
to reduce the opening. clockwise to enlarge the opening.
1
4
tecHnical data
Model
Max. punching capacity, paper
Max. punching capacity, plastic covers
Punching margin control (for comb only)
Binding capacity / Max. plastic comb's size
Binding capacity/Max. wire comb's size
Releasable dies
Adjustable paper limiter
net weight
Dimensions (wxDxH)
© ARGO S.A.
EN
2
5
21 for plastic comb / 34 for wire combs
10
3
6
X5 2-in-1
20 sheets (80gsm)
2 sheets
2-6 mm
450 sheets / 51 mm
115 sheets / 14,3 mm
Yes
14,6 kgs
360x440x210 mm
www.argo.pl