Cisco Catalyst 7500 Series Panduan Konfigurasi - Halaman 25

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Perangkat Keras Jaringan Cisco Catalyst 7500 Series. Cisco Catalyst 7500 Series 50 halaman. Chassis interface board
Juga untuk Cisco Catalyst 7500 Series: Lembar data (11 halaman), Panduan Pemecahan Masalah (11 halaman), Mengganti Manual (40 halaman)

Halaman Cetak

Cisco Catalyst 7500 Series Panduan Konfigurasi

1. Overview
2. Network Topology
3. Configuring a New Controller Starting from Factory Defaults
4. Connecting to the Controller Via a Browser
5. Controller Setup
6. Connecting Aps

Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs

RRM parameters

In the navigation pane under 802.11b/g/n, click RRM. Set RRM parameters as follows:

Click TPC. Set the Tx Power Level Assignment Algorithm to Fixed. (The Invoke

Power Update Once/On Demand setting may be deployed occasionally to allow the

Cisco network to self-configure at a time of low usage.) Note that the individual AP

assignments shown above override the Fixed power level set here.

721-1001-000-AH.docx

December 2016