Cisco CE 2000 Platform SCE 2000 4xGBE Panduan Memulai Cepat - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan Cisco CE 2000 Platform SCE 2000 4xGBE. Cisco CE 2000 Platform SCE 2000 4xGBE 29 halaman. Service control engine

Halaman Cetak

line vty 0 4

timeout 180

exit

interface Mng 0/1

exit

interface Mng 0/2

exit

aaa authentication login default local

management-agent property "com.pcube.management.framework.install.activation.operation" "Install"

management-agent property "com.pcube.management.framework.install.activated.version" "3.5.5 build 127"

management-agent property "com.pcube.management.framework.install.activated.package" "SCA BB"

management-agent property "com.pcube.management.framework.install.activation.date" "Tue Jun 04 20:57:48

GMT+00:00 2009"

ip rpc-adapter security-level none

Saving or Changing Configuration Settings

When you make changes to the current running configuration and you want those changes to remain in effect when the system

restarts, you must save the changes before leaving the management session. To do so, save the running configuration to the

startup configuration file.

The SCE platform provides multiple interfaces for configuration and management. All interfaces supply an API to the same

database of the SCE platform. Any configuration made through one interface is reflected through all interfaces. Furthermore,

when saving the running configuration to the startup configuration from any management interface, all configuration settings

are saved regardless of the management interface used to set the configuration.

For backup purposes, the old startup-config file is saved under the directory:

To remove a configuration command from the running-config, use the no form of the command.

At the SCE# prompt, type show running-config to view the running configuration. The running configuration appears.

Step 1

Step 2

Check the configuration to make sure that it is set to your specifications. If not, make the changes you want before

saving.

Type copy running-config startup-config. The system saves all running configuration information to the configuration

Step 3

file, which is used when the system reboots.

The configuration file holds all information that is different from the system default in a file called config.tx1 located

in the directory: /system.

Saving or Changing Configuration Settings—Example

The following example shows how to save the running configuration file (first displaying the file to review the settings).

SCE#show running-config

#This is a general configuration file (running-config).

#Created on 13:39:29

UTC

#cli-type 1

#version 1

hostname "SCE-2020-1"

enable password level 5 0 "admin"

enable password level 10 0 "admin"

enable password level 15 0 "admin"

no management-agent notifications notification-list 1417,1418,804,815,1404,1405,1406,1407,1408,400

no management-agent notifications notification-list 402,421,440,441,444,445,446,450,437,457

no management-agent notifications notification-list 3593,3594,3595,10040

snmp-server enable

interface LineCard 0

TUE

July

2009

/system/prevconf