Digitone ProSeries 3 Panduan Pengoperasian - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Aksesori Telepon Digitone ProSeries 3. Digitone ProSeries 3 16 halaman.

Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the

prompt for "Enter Code" displays, enter 73, display shows function.

"Private" Call Pass Thru

Code 74

Using Code 74 can allow "Private" type calls with No Number displayed to ring through

to the TEL phone port while still blocking Out of Area and stored numbered calls. To

enable Private Call Pass Thru, enter programming: then enter 74, when "Enter Code"

displays. To turn this feature Off, when the prompt for "Enter Code" displays enter 75,

display shows function.

"Out of Area" Call Pass Thru

Code 76

Using Code 76 can allow "Out of Area" type calls with No Number displayed to ring

through to the TEL phone port while still blocking Private and stored number calls. To

enable Out of Area Call Pass Thru, enter programming: then enter 76, when "Enter

Code" displays. To turn this feature Off, when the prompt for "Enter Code" displays

enter 77, display shows function.

PBX Extension Pass Thru

Code 78

Using Code 78 can allow a PBX system that uses 1 to 6 digit extension numbers to pass

through the DPS3 without being hung-up on as a OPX type call. Code 78 overrides this

function and extension ringing is possible while still blocking Out of Area, Private and

Anonymous calls. To enable PBX Pass Thru, enter programming: then enter 78, when

"Enter Code" displays. To turn this feature Off, when the prompt for "Enter Code"

displays enter 73, display shows function.

After Hours Mode

Programmable Time Feature Introduction

During a certain time of the day or night you can set the DPS3 to enter into After Hours

Mode. This mode is designed to keep phones connected to the TEL phone port from

ringing and allow calls to be answered by an optional answer machine when it is

enabled on a daily basis. If you run a business, then you would use this After Hours

Mode so all callers can leave a message. If your work or dinner times are different

from regularly scheduled times, you would use this mode so that you can get your sleep

or to completely avoid disruptive callers. During After Hours Mode, VIP callers can

ring through at any time regardless of the After Hours time settings.

Invited

callers can only ring through normally when After Hours Mode is not enabled.

To use the After Hours Mode, you must first understand military time presented here.

The clock on the DPS3 display converts the telephone company's supplied clock data

into either AM or PM time. If the morning hours are 1:00am = 0100 hours, etc. until

noon = 1200 hours and then the afternoon hours are 1:00pm = 1300 hours, etc. until

midnight = 0000 hours. For example, to set a time for hours beginning in the evening

until the next morning: 4:54pm to 6:45am you would use the military time of 1654

(Code 82 1654) and 0645 (Code 83 0645) as the two numbers for your After Hours

settings. To set a time for early morning until lunch time or 1:00am to 12:00pm you

would use 0100 and 1200.