Digitone proseries blocker Panduan Pengoperasian - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Ponsel Digitone proseries blocker. Digitone proseries blocker 17 halaman. Automatically blocks and routes screened calls with caller id
Halaman Cetak
Block Button
RED
– Blocking Names
This feature only works with the Block button on Call History entries and not in Programming.
Block up to twenty individual names with or without numbers that use the same name with different
numbers. Using the Call History Up or Down view buttons, press the Block button Once quickly on
the front panel on the selected Name you want to block. After 1 second, the Name on the lower line of
the display will begin to blink. To store that name, press the Block button again Twice quickly and
then the display will indicate "Name Blk Stored" for that Caller ID name shown.
Invite Button
GREEN
Invited Callers can be entered by First using the Call History Up or Down view buttons to put the
dashes in the selected number, then press and hold the Invite button on the front panel for one second
until you see "Release Button" displayed. Release the button and you will see "NBR Invited". The red
LED indicator will flash to show that call is now on the Invited Call List. When an invited caller calls in,
the caller ID will display their number and "Invited".
Invite Button
GREEN
Inviting VIP Callers can be entered by First using the Call History Up or Down viewing buttons to put
the dashes in the selected number, then press the Invite button Twice quickly on the front panel.
"NBR VIP" will display and the red LED indicator will flash to show that call is now on the VIP Call List.
When a VIP caller calls in, the caller ID will display their number and "VIP".
Clearing Display
RED
To delete a single number from Call History, use the Call History Up or Down arrow keys to select the
number you want to remove. Notice the number has dashes between the digits, Ex. 894-555-1234, Press
and hold the Block Button for 3 seconds, then see "Release Button" displayed. Release the button to
clear that displayed call.
Clearing Display
RED
To Remove the entire Call History, if a number has dashes between the digits, wait until the dashes
are removed, Ex. 8945555794 and only the number shows, then Press and hold the Block Button for 3
seconds, you will then see "Release Button". "CID List Deleted" will then display, clearing all call history.
Reviewing Call History
of List. The right button Down arrow button displays the last call or End of List. When Call History
starts to fill up with calls, you can jump to the Top of List by pressing and holding the Up arrow key or
pressing and holding the Down arrow key to go to the End of List.
Customizing Your Setup through Programming Features
- Numbers
– VIP Numbers
– Just One Number
– All Displayed Numbers
GRAY Toggle
The left Up arrow button displays the previous calls or Top
Advanced User Settings
How do I enter into Programming?
4