Argo-Hytos TSE3-D Panduan Petunjuk Pengoperasian - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Beralih Argo-Hytos TSE3-D. Argo-Hytos TSE3-D 12 halaman. Electronic pressure switch
Halaman Cetak9.4.9 Graphical depiction of the colour change of the display
Display colour change for the parameters
[r1ou] / [r2ou],
mode
hysteresis function
Measured value > switch point OUT1/OUT2;
Display = red
Display colour change for the parameters
[r1ou] / [r2ou],
mode
window function
Measured value between FL1/FL2 and FH1/FH2;
Display = red
Display colour change for the parameters
[r12],
mode
hysteresis function
Measured value between OUT1 and OUT2;
Display = red
Display colour change for the parameters
[r12],
mode
window function
Measured value outside FL1 ... FH1
and FL2 ... FH2;
Display = red
More information at www.argo-hytos.com
Subject to change · TSE3-D_9193_1en_09/2019
Display colour change for the parameters
[G1ou] /
[G2ou], mode
hysteresis function
Measured value > switch point OUT1/OUT2;
Display = green
Display colour change for the parameters
[G1ou] / [G2ou],
mode
window function
Measured value between FL1/FL2 and FH1/FH2;
Display = green
Display colour change for the parameters
[G12],
mode
hysteresis function
Measured value between OUT1 and OUT2;
Display = green
Display colour change for the parameters
[G12],
mode
window function
Measured value outside FL1 ... FH1
and FL2 ... FH2;
Display = green
Colour change display green
Colour change display red
1
Initial value of the measuring range
2
Final value of the measuring range
Representation [r-12] / [G-12] only
possible when [ou2] = switching
output.
Colour change display green
Colour change display red
1
Initial value of the measuring range
2
Final value of the measuring range
Lower limit value window function
FL1 / FL2
outputs OUT1 / OUT2
Upper limit value window function
FH1 / FH2
outputs OUT1 / OUT2
Strana 10