Cisco CWDM-OADM 1-1530 Catatan Instalasi - Halaman 14
Jelajahi secara online atau unduh pdf Catatan Instalasi untuk Perangkat Keras Jaringan Cisco CWDM-OADM 1-1530. Cisco CWDM-OADM 1-1530 36 halaman. Passive optical system
Safety Overview
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040
Class I (CDRH) and Class 1M (IEC) laser products. Statement 1055
Warning
Use of controls, adjustments, or performing procedures other than those specified may result in
Warning
hazardous radiation exposure. Statement 1057
The maximum output is less than 10 mW when measured through a 3.5-mm apeture located at a distance
Note
of 100 mm and the wavelength is 1470-nm to 1610-nm from the multichannel MUX or OADM module
output connectors. Other fiber-optic ports have been tested and comply with the Class 1 limits of
IEC 60825-1 and Class 1 limits of 21 CFR 1040.10 (with considerations pursuant to FDA Laser
Notice 50, dated July 26, 2001).
Cisco CWDM Passive Optical System Installation Note
14
78-16565-02