Cisco Firepower 4150 Manual - Halaman 3

Jelajahi secara online atau unduh pdf Manual untuk Perangkat Keras Jaringan Cisco Firepower 4150. Cisco Firepower 4150 8 halaman. Rack-mount and ground the chassis
Juga untuk Cisco Firepower 4150: Panduan Pemeliharaan dan Peningkatan (20 halaman), Manual (36 halaman), Manual (26 halaman), Manual (42 halaman), Memulai (42 halaman)

Cisco Firepower 4150 Manual
Rack-Mount and Ground the Chassis
Warning
Warning
Step 1
Attach a rack mount bracket to each side of the chassis using the six 8-32 x .375-inch Phillips screws provided in the
accessory kit.
Figure 1: Attach the Rack Mount Bracket to the Side of the Chassis
1
Chassis
8-32 x .375-inch Phillips screws (three per side)
3
Step 2
Attach the inner rails to the sides of the chassis:
a) Remove the inner rails from the slide rail assemblies.
b) Align an inner rail with one side of the chassis so that the three keyed slots in the rail align with the three pegs on the
side of the chassis.
Statement 1032 Lifting the Chassis
To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the
handles on modules, such as power supplies, fans, or cards. These types of handles are not designed to
support the weight of the unit.
Statement 1047—Overheating Prevention
To reduce the risk of fire or bodily injury, do not operate the unit in an area that exceeds the maximum
recommended ambient temperature of 104°F (40°C).
2
Rack-mount bracket
Rack-Mount and Ground the Chassis
Rack-Mount the Chassis
3