Argon 18 KRYPTON 212B Panduan Perakitan - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Perakitan untuk Sepeda Argon 18 KRYPTON 212B. Argon 18 KRYPTON 212B 18 halaman.

KRYPTON 212A/212B: Table of contents

Assembly Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1. Frame inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. Headset installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3. Cable housing installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

4. Electronic drive-train specification . . . . . . . . . . . . . . . . . . . . .8-12

5. Saddle adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14

6. Derailleur hanger adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

7. Parts' SKUs and Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

For the warranty to be valid, the bicycle must be fully assembled by an authorized Argon 18 dealer. High end components,

particularly carbon parts, need extra care when assembled. Those components must be installed using a calibrated torque

wrench to make sure every bolt is at the right torque setting to prevent damage.

No more than 30mm of spacer can be place between the stem and the top cap of the 3D system.

And the use of more than 5mm spacer on top of the stem could void the efficiency of the compressor.

These practices will automatically cancel any warranty claim against the manufacturer.