Cisco GS7000 Panduan Pemecahan Masalah
Jelajahi secara online atau unduh pdf Panduan Pemecahan Masalah untuk Perangkat Keras Jaringan Cisco GS7000. Cisco GS7000 12 halaman. Gainmaker node
forward local injection module
Juga untuk Cisco GS7000: Panduan Petunjuk Instalasi (13 halaman), Panduan Pemeliharaan (15 halaman), Pemecahan masalah (4 halaman)
Halaman Cetak
Troubleshooting
This troubleshooting section lists common problems and their solutions. If a troubleshooting procedure directs
you to replace a module of the 1.2 GHz GS7000 Remote PHY Device (RPD) 2X2 Segmentable Node, see
Removing and Replacing
•
•
•
•
•
•
•
No RF Output at Receiver RF Test Point: Optical Power LED on
Receiver Module is off
Follow this troubleshooting flowchart. Also see the notes following the chart.
Modules.
No RF Output at Receiver RF Test Point: Optical Power LED on Receiver Module is off, on page 1
Poor C/N Performance, on page 4
Poor Distortion Performance, on page 6
Poor Frequency Response, on page 8
No RF Output from Reverse Receiver, on page 9
Reference: 2x2 RPD Module LEDs, on page 10
Troubleshooting
1