Cisco IAD2430 Series Panduan Memulai Cepat - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan Cisco IAD2430 Series. Cisco IAD2430 Series 34 halaman. Integrated access device
Juga untuk Cisco IAD2430 Series: Panduan Ikhtisar (13 halaman), Ikhtisar (16 halaman)
Halaman Cetak
Rack-Mounting the Chassis
To rack-mount the chassis, follow these steps:
Choose one of the methods shown in Figure 8, Figure 9, Figure 10, and Figure 11, as appropriate, and attach the long
Step 1
side of the mounting brackets to the chassis, as shown.
Make sure to use the correct screws for this mounting option (see Table 1 on page 11).
Caution
Screws are included for attaching the brackets to the chassis, but not for installing the chassis in a rack or on
Note
a wall. You must purchase four additional machine screws to install the chassis in a rack. Use the screw size
required by your rack.
Cisco IAD2435-8FXS provides for back-panel rack-mounting only, as shown in Figure 11.
Caution
Figure 8
19-Inch Rack-Mounting with Front Panel Forward
Figure 9
19-Inch Rack-Mounting with Back Panel Forward
Figure 10
Telco 19-Inch Rack-Mounting with Back Panel Forward
12
C IS C O IA
D 24 00