Digitrax DN166I0 Panduan Memulai Cepat - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Mainan Digitrax DN166I0. Digitrax DN166I0 8 halaman.

Digitrax Transponding CV61

Digitrax Transponding is controlled by CV61. The initial factory set value is 000

for OFF. To turn on transponding, program CV61 to a value of 002. This al-

lows you to use Digitrax transponding to keep track of your rolling stock. When

transponding is enabled, the front light of the locomotive will flicker slightly to

indicate transponding signal is being communicated. For optimal transponding

operation, we recommend that you hook up the forward and rear lights as shown

above.

Decoder Reset CV08

Decoder reset lets you reset all CV values to the initial factory settings. To reset all

CV values, program CV08 to a value of 008. You also have the option of resetting

all the CV values except the 28 speed step tables. To do this program CV08 to a

value of 009.

Warranty & Repair

Digitrax gives a one year "No Worries" Warranty against manufacturing defects

and accidental customer damage on all Digitrax command stations, boosters,

throttles, decoders, power supplies and layout control devices.

That's it! A simple, straightforward warranty with no tricky language!

Visit www.digitrax.com for complete warranty details and instructions for

returning items for repair.

Please return warranty items directly to Digitrax - DO NOT return items

to place of purchase.

— 7 —