argon audio TT-4 Manual - Halaman 3

Jelajahi secara online atau unduh pdf Manual untuk Meja putar argon audio TT-4. argon audio TT-4 9 halaman.

1. Counterweight

The counterweight is used for precise adjustment of the stylus

pressure on the vinyl, to properly balance the tonearm.

2. Anti-Skating Control

Use this to set the anti-skating function of the tonearm.

3. Tonearm Lever

Use this lever to lower and raise the tonearm.

4. Tonearm Lock (arm rest)

Use this to lock the tonearm in place when not in use.

5. Headshell

This holds the stylus ("needle") in place and provides protection

by means of its removable stylus protection cap (not shown)

6. Platter

Put the slip mat onto this platter before placing record disc.

7. 33/45 RPM Switch (33/off/45):

Select 33 or 45 rpm for playing a vinyl, switch to "OFF" to pause

the playing. Switch to 33 or 45 again, to continue the playing

from the pause point.

8. Signal Connectors

Plug in the RCA cable and connect the cable to audio amplifier.

9. Ground Terminal

Connect a ground wire.

Phono on/ff

10.

If you have an amplifier with built-in phono stage, set this to off.

11. Power supply jack:

Plug-in DV12/0.5A switching adaptor for power supply.

Power Switch

12.

Argon Audio A/S | DALI Allé 1, DK-9610 Nørager, Denmark

T T - 4 M a n u a l